The Best 38 Block Vacuum

FEATURES: *New Design Manifold Gauge with Aluminum Alloy Frame; *4-Valve Manifold for quick evacuation with 3/8 ” vacuum port + hose to cut evacuation time by half. *Large, easy-to-read 3 1/8″ diameter steel case red and blue; front access for easy field recalibration; *Color coded Easy to grab big knob control valve handles, double “O”-ring piston for reliability and long service life. *a sight viewing glass on the block to see the inside action during charging/diagnosis/recovery all hose ports and anchors are 1/4″ except the big black one, which is 3/8″ 3 ft; *Hose anchors on the frame block. *Pressure in PSI Temperature in °F for these refrigerants: R410A, R22, R404A, making this manifold one set does it all. *Heavy duty SS hook included *Come with: 3 Color Coded High Pressure Hose set and a black vacuum hose: 60 inch in length each on RYB, 800 PSI working pressure; 4000 PSI burst pressure. *1/4″ female SAE brass fitting to the gauge block *1/4 ” female SAE brass fitting on the service side with a 45 degree turn for easy access. * 36 inches on big Black hose 3/8 ” SAE flare on both ends, big hose for a faster evacuation. *Teflon O-ring washer provide the best seal and the most durability)

Product Name:
Vacuum Brazed Diamond Dry Drilling Core Bits

Quantity:
6 Pieces Different Size
Size Included: 06mm(1/6″), 08mm(5/16″), 10mm(3/8″), 19mm(3/4″), 32mm(1-1/4″) and 38mm(1-1/2″)

Specification:
Diameter 6-16mm：35mm Max working depth, 10mm Diamond height, Total Length 62mm
6mm-16mm bits with Wax inside helps cooling the bits
Diameter 19-152mm：50mm Max working depth, 15mm Diamond height, Total Length 75mm
**The Thread of Drill bits are 5/8-Inch-11, Recommended Machine: angle grinder**
If you fit them on drill or other machine, you need an adapter, such as SDS, hex, Round plus shank…

Application :
Dry/wet drilling for porcelain tile, granite, marble, stone, Masonry, brick…

Feature:
1. 1.Fast and Smooth drilling
2. Long lifetime
3. Less Chipping
4. Minimizing any breakage
5. Less loss of material
6. Less heat generation
7. Better finish quality
================THE END================
Available Diameter: 6mm-152mm(1/6 Inch to 6 Inch).
Note: If the value of your order is more than $100 in our store,
we’d like to send it to you by free UPS from China, only for American order.

Operation Tips for Vacuum Brazed Diamond Drill core bits
1.Do not use these drill bits with hammer mode
2.Only fit these drill bits on a cord drill, not cordless drill(no enough power)
3.Only for tile drilling not recommend for the material behind the tile
4.For horizontal drilling,just give a gentle pressure
For vertical drilling, the weight of the machine will give sufficient pressure
5.Start drilling as per following instructions:
1) Place the drill at a 45 degree angle
2) Drilling till the hole start to form
3) Bring the drill up into upright position
4) Continue to drill and swaying the machine along a circle

Great to tie in Boost Controllers, Gauges and any components that require a separate vacuum source. You can also use them for fuel and oil requirements with tape. Billet vacuum manifold kit is a great add-on for tuner that require additional vacuum sources. It has 6 ports, and also comes with plug if tuner don’t require that many ports. This will ease up all the trouble for splitting up lines and making extra ports if needed.

Package list:
1 * Vacuum Manifold Kits

Specifications:

Shell material: ABS resin
Diaphragm material: silicon rubber
Diameter: 10mm/0.39 inch
Total length: 43mm/1.69 inch
Opening pressure: ≤0.5 Kpa
Maximum back pressure: ≥0.3 Mpa

※Medical grade material, safe and nontoxic;
※Strong resistance to acid, alkali, salt corrosion ability;
※Under 25 Degrees Celsius ~ 60 Degrees Celsius environment is normal performance, and has good form ability.
※Used in fluid system to prevent reverse flow flow, or used in pneumatic system to prevent reverse flow of compressed air.

Package include:

1x Check Valve

Pipe fittings are made of brass, resist corrosion, pressure, and wear.
Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications.
Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.

WAY OF PACKAGING:
The product packaging method is bagged Please confirm before buying

Product precautions Please pay attention before buying:

These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

3/8″ (10mm) industrial diamond hole saw

The battery power post is available in red or black. Useful for customizing vehicles or relocating batteries. 3/8″ bolt post molded into a composite insulating bast that can be screwed or bolted down.