The Best Lennox Circuit Board L415

You love intricate vinyl designs, and now weeding is part of the fun with Cricut’s Weeding Tool Set! This specialty set includes 5 tools designed to work with speed, ease, and accuracy. You get fine tweezers with long, fine tips to hold and lift slender, delicate vinyl strips. Remove larger pieces with the hook tweezers. You also get the classic weeder, with a versatile angled tip. Pierce and lift or place cuts with the piercing tool. The hooked end of the hook weeder provides the ideal angle for weeding trickier materials, such as glitter vinyl.

Components Features:

PCB Board features and info:

–  10 pcs 2 x 8 cm (168 solder points) with a matrix of   6 by 28 Plated Through Hole (PTH)

–  10 pcs 3 x 7 cm (240 solder points) with a matrix of 10 by 24 PTH

–  5 pcs 4 x 6 cm (280 solder points) matrix of 14 by 20 PTH

–  5 pcs 5 x 7 cm (432 solder points) matrix of 18 by 24 PTH

★ ★ Header Sockets

–  10 pcs 1 x 40 Pin Male Header Pin

–  10 pcs 1 x 40 Pin Female Header Pin

–  10 pcs 1 x 40 Pin Right Angle Male Header Pin

Pitch 0.1’/2.54mm; pin length 11.5mm / 0.45′;

★ ★ Jumper Caps

– 30 pcs Jumper caps

★ ★ Terminal Blocks

– 5 pcs 2 Pole Terminal, (2.54-2P)

– 5 pcs 3 Pole Terminal, (2.54-3P)

★ Electrical Specification

Rated Voltage: 150V/AC; Rated current: 6A; Contact Resistance: 20m Ohm MAX; Insulation; Resistance: 5000M Ohm/1000V; Dielectric Strength: 1250V/1 min

★ Mechanical Specification

Temp range: -40F ~ +105C; Torque: 0.1 Nm; Wire range: 26~18AWG; MAX Soldering: +250C for 5 Sec; Strip length: 4.5mm; Pitch 0.1’/2.54mm Terminal blocks; Poles: 2P, 3P

★ Part and Material

Screw: M1.5 Steel Zinc plated; Wire guard: Brass, Ni plated; Pin header: Brass, Tin plated; Housing: PA66, UL94V-0

Product Description:
Dimension: 2×8/ 3×7/ 4×6/ 5×7/6x8CM
Thickness: about 1.6mm
Material: Great quality of glass fiber FR4
Color: green basic, silver tone
Package List
– 20pcs 2*8CM prototype PCB universal board

Product Description

Bosch relays are consistently reliable and perform switching operations in both automobiles and off-highway applications. The range includes 12- and 24-volt relays in a variety of sizes.

Set Contains:

– Pins, 12 V, 75 A, black Normal Open Power Relays with a bracket

AUSTOR 36 Pieces Double Sided PCB Board Prototype Kit with Free Box

Features
36 Pieces in 5 different sizes
A good assortment to meet your design demands such as electronic experiments and DIY projects

Easy to use
Pre-tinned plated holes on the board make it very handy to solder components and sensors for your projects

Easy installation
4 Mounting holes at the corners of the board are very convenient for installing them together

Specifications
Dimension: 2×8/ 3×7/ 4×6/ 5×7/ 7×9 cm
Material: high quality glass fiber FR4
Thickness: about 1.6mm
Hole-pitch: 2.54 mm
Hole-diameter: 1 mm

Package include
2x8cm Prototype PCB universal board * 8
3x7cm Prototype PCB universal board * 10
4x6cm Prototype PCB universal board * 8
5x7cm Prototype PCB universal board * 8
7x9cm Prototype PCB universal board * 2
Free plastic box * 1

Product Warranty

Austor Direct Customer Service Team is dedicated to offering our valued customers a great and professional services – Timely email reply, Helpful solutions, Refund & Return Warranty.

All Austor products supply 45 days money-back & 18-month warranty. Any questions you have, please don’t hesitate to contact us. We will get you back within 24hours.

Expression begins with the origin series. It delivers two distinct Voices, a new tilt tone blend control, power reduction features, and is pedal friendly. The classically voiced single channel amps generate rich and harmonic tones that are ideal for players to explore new possibilities and craft their sound. The origin series has the tone, and features for those playing in the bedroom, as well as on stage.

More than 40 years ago this simple hearing protector, the world’s first foam ear plug, revolutionized hearing protection in the workplace and has remained to this day one of the most widely used earplugs in the world. The 3M E-A-R Classic Ear Plugs are constructed from slow-recovery, low-pressure foam. They fit snugly to create a noise barrier that helps protect hearing from loud sounds. These ear plugs are stiff enough when compressed to make fitting easy, yet soft enough to be comfortable in the ear for extended wear. Bright yellow color allows supervisors to conduct quick visual hearing protection compliance checks. Recommended applications include chipping, chiseling, drilling, furnace operations, grinding, heavy equipment operations, machining, pouring/casting, power fastening, riveting, sanding, sawing and welding. These earplugs are commonly used in the following industries: agriculture, automotive, chemicals, construction, general manufacturing, healthcare, oil and gas, and pharmaceuticals. These ear plugs have a Noise Reduction Rating (NRR) of 29 dB, CSA Class AL.* Can be fit tested with the 3M E-A-Rfit Validation System. Moisture resistance helps maintain a consistent fit, even when humidity is present. Not only is noise present in our daily routines, but millions of Americans work in hazardous noise on a daily basis. Estimates from the National Institutes of Health suggest that approximately 15 percent of Americans (26 million people) between the ages of 20 and 69 have high frequency hearing loss due to exposure to noise at work or during leisure activities. Hearing loss due to noise is almost entirely preventable by consistent use of hearing protection.* Note: 3M strongly recommends fit testing of hearing protectors. Research suggests that many users will receive less noise reduction than indicated by the NRR due to variation in hearing protector fit, fitting skill, and motivation of the user. If the NRR is used, 3M recommends that it be reduced by 50% or in accordance with applicable regulations. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

This 7-piece set includes all the tools you need to slice, snip, score, weed, burnish, and trim a wide variety of materials Perfect for vinyl, paper, iron-on projects and more. This 6. 5×10. 25 inch package contains one portable trimmer, one scoring stylus, spatula, one weeder, one scraper, one pair of scissors and one pair of tweezers. Imported.

Minilab Mk II is a high quality, feature-packed controller which gives you hands-on access to the sounds in your virtual studio. Breathe new life into your sounds by playing, tweaking, tapping and twisting its rugged controls. This powerful controller also comes with several critically acclaimed software titles that will have you creating professional recordings in no time. Analog Lab Lite lets you perform using hundreds of legendary synth, piano, organ & string machine sounds. Ableton Live Lite lets you record, arrange, and cultivate your musical ideas into a finished product. UVI Grand is a recreation of the Steinway Model D piano. MiniLab Mk II is a powerful controller that will open up a new world of sound design, performance, and music production to you. Every element of the reinvented MiniLab has been carefully chosen to give you the best experience possible. Beautifully playable mini keys, responsive and durable performance pads, wiggle-free rotary knobs, all wrapped up in a compact, ergonomic, rugged design.

This 5-piece set includes essential tools you need to lift, snip,burnish, and weed a wide variety of materials. Perfect for vinyl, paper, iron-on projects and more. This 6.5×10.25 inch package contains one spatula, one weeder, one scraper, one pair of scissors and one pair of tweezers. Imported.