We spent many hours on research to finding cell mount 3m, reading product features, product specifications for this guide. For those of you who wish to the best cell mount 3m, you should not miss this article. cell mount 3m coming in a variety of types but also different price range. The following is the top 9 cell mount 3m by our suggestions
610 reviews analysed
1. Mount Metal Plates Replacement Kits with 3M Adhensive for magnetic Car Mount Phone Holder 4 Pack (2 Rectangle 2 Round)
Feature
- 【4-Pack Replacement Kits】4.5cm*6.5cm rectangular metal plate x 2 Pieces,round metal plate with a diameter of 4cm X 2 Pieces
- 【Material】The product is made of high-quality manganese steel material and the matte surface is easier to clean than ordinary ones.
- 【Thin&Practical】The thickness of the product is only 0.5mm, which is light and practical.The metal plate is very thin and light.3M adhesive works well and is easy to install.
- 【Use For Magnetic Mount】Metal plate is mainly used for magnetic phone support, it without magnetic.3M adhesive on the back of the sheet metal, used in the fixed plate of the back of the phone.
- 【Tip】 The metal plate do not with magnetic.The metal plate is design for magnetic car phone holder and can work well for it.
2. Universal Metal Plates with 3M Adhesive for All Magnetic Car Mounts | Cell Phone, Tablet Holder, Cradle-Less, Air Vent Mount | 6 Rectangular, 6 Round, Black
Feature
- Engineered with 3M Adhesive for long lasting and stable hold, these plates set your phone on the car mount easier and securer so you can go hands-free even on the bumpiest of roads.
- Features smooth edges that won’t scrape your hands and are designed for one hand mounting and strong magnetic hold.
- Installs and removes in a snap and will not leave any sticky residue on your phone or phone’s case.
- Paper thin plates, that leave no detectable bulk to the phone or phone case.
- 12-Pack set includes 6 Rectangular and 6 Round Plates giving you enough options to use with bigger or smaller devices.
Description
No more phone falls, even over bumpy roads with these durable, heavy-duty yet very thin and light-weight Metal Plates for Car Mounts by Great 1.
Built with high quality Stainless Steel for extra strength and stability, our Metal Plate is compatible with all Magnetic Smartphone and Tablet holders, designed to hold devices with the metal plate. All Great 1 metal plates have pre-applied 3M Brand double sided tape which leaves less residue than low cost double sided tape.
3 Ways to Stick –
- Stick it to the back of your Phone’s case.
- Stick to the back of device.
- Place it between phone and case.
Note –
For Wireless Charging, please place metal plate on the phone away from wireless charging sensor OR place metal plate on phone case, remove case when wireless charging.
With 12 plates, you will have plenty for the whole household! Get yours today!
*Not Magnets
3. Trianium Magnetic Car Phone Mount for iPhone Xs Max XR X 8 7 6s 6 Plus,Galaxy S10 S10+ S10e S9 S8 Edge Note 9,LG G7 ThinQ,Pixel 3 XL[Stick On Dashboard Holder w/3M Adhesive/Bendable Base/Metal Plate]
Feature
- VERSATILE MAGNETIC MOUNT – The Trianium Stick On Magnetic Car Mount’s powerful magnetic force conveniently and securely attaches your smartphone to your desired surface. Whether you’re in your car, kitchen, office or bedroom, enjoy a hands-free experience with your smartphone. (Compatible with all smartphones: iPhone XR XS Max X, iPhone 8/7 Plus/8/7/6/6 Plus, Galaxy S10/S10+/S10e/ S9/S9 Plus/S8/S8 Plus/S7/S7 Edge/Note 9 8, LG G7 G6, Pixel/2, Pixel XL/2 XL, HTC, Xperia, Nokia, Nexus)
- STRONG MAGNETIC FORCE – Featuring a durable casing that houses four heavy-duty magnets, smooth rubber magnetic pad, and a high-quality 3M adhesive sticker. The Magnetic Mount will keep your smartphone stable even though the bumpiest and curviest car rides. (NOTE: For direct mounting of metal plates onto your smartphone, use the included protection film BEFORE attaching the metal plate. Then attach the metal plate over the film to prevent any damage to the device.)
- EASY TO INSTALL – No tools necessary for this installation! Simply peel back the adhesive and stick the Mount to any surface. Features a bendable base to allow for contour onto any curved surface. Also, includes metal plates for your phone. Either attach the metal plates directly onto your phone or simply insert it between your phone and phone case. (NOTE 1: Metal plates will interfere with wireless charging capabilities. Remove the plate before using a wireless charge.)
- OPTIMAL VIEWING – The ball head joint of the Magnetic Mount allows for 360-degree rotation. Rotate your smartphone in any orientation (horizontal or vertical) and at any angles, giving you the most comfortable viewing experience. Also, features a cable management clip to organize your charging cable and provide a distraction-free ride. (NOTE: The Magnetic Mount WILL NOT block the air vent and the windshield of your car.)
- ONE YEAR WARRANTY – From Trianium to ensure maximum protection for your Stick On Magnetic Car Mount
4. Universal Metal Plate 8 Pack for Magnetic Phone Car Mount Holder Cradle with Adhesive (Compatible with Magnetic Mounts) – 4 Rectangle and 4 Round, Black
Feature
- Universal metal plate: Easy to use with all magnetic car mount holder
- Package includes: Rectangle – 1.8″ x 2.6″ (4Pcs)
- Round one ‘s diameter – 1.6″ ( 4Pcs)
- Strong adhesive: Each metal plate has strong adhesives tape, Easy to stick onto the back of phone or case without a hassle
- Wide compatibility: All of the metal plates are not magnetic, we strongly recommend to use these metal plates along with universal magnetic mounts wherever you want
- Important note: Metal plate may disable wireless charging, if you stick it on the back of the phone/case,Suggest to take the case off when use wireless charging
Description
NOTE:
1. This item is PURELY a metal plate, which designed to work with magnetic mount. It’s NOT a magnet. 2. Clean and dry the surface of your phone/ phone case before sticking the plate on your device.
3. Suggest you Mount the metal plate inside your phone case for beautiful design. 4. The decorative metal plate with adhesive cannot not be used twice after removal.
Features: Great to use with all 3.5-6″ cellphones. They also work through a thin case.
Hold your GPS or tablets more stable with the rectangular metal plate or use two metal plates. Safely protect your devices or hands from scratching with the rounded edge.
Easy to attach and remove without a hassle.
Specification: 1. Material: Rust-Free Iron
2. Color: Black
3. Dimension:Rectangle – 1.8″x2.6″/45x65mm (4Pcs) ; Round one ‘s diameter – 1.6″/40mm ( 4Pcs)Package Includes:
4xRectangular Adhesive metal plates. 4xRound Adhesive metal plates.
5. 3M Sticky Adhesive Replacement APPS2Car Dashboard VHB Sticker Pads for Magnetic Phone Car Mount,Car Phone Holder Parts,4 Pcs Double Sided VHB Mounting Pads Car Phone Mount Base Sticker Tapes
Feature
- ➣Strong Stickness: Original 3M VHB stick adhesive pads,Double sided self sticky,1.55mm thickness black VHB adhesive pads,stronger than most adhesive pads.
- ➣Suitable for stick many kinds of material with flat hard surface.It can be used in home bathroom mirror, refrigerator,bed post, wall, locker, office, driving personnel and other related equipment replace.
- ➣Rectangular 3M VHB sticky adhesive tape can be used on the bottom of the most dashboard 360 degrees Rotation magnetic car phone mount holder, which is stable even in bumpy roads.It is a strong sticky adhesive replacement for phone car mount.Compatible with Wizgear,Bextrix,Scosche ,Trainium ,PLDHPRO ,Ailun etc.magnetic phone car mount.
- ➣This 3M VHB adhesive pad is high temperature resistance and low temperature resistance,water-proof,Tear off non-trace.
- ➣NOTE:(1),Please don’t stick the 3M adhesive pad on very soft, rugged, texture,grease surface or leather surface.(2),Make sure the desired surface is clean and dry.(3),The 3M VHB adhesive pad is one-time use.(4),It is recommended to wait at least 24 hours ensure the sticker get the best stickiness before use.(5),WORRY-FREE:APPS2Car comes with best-in-class customer service,and lifetime warranty.Please contact us immediately if you have any problem.
Description
NOTE:
1,Please don’t stick the 3M stick adhesive pad on very soft, rugged, texture,grease surface or leather surface.
2,Please remove the residual glue and clean the surface.
3,The 3M VHB adhesive pad is one-time use.please sealed preservation.
4,It is Recommended to wait at least 24 hours after stuck before using.The longer the adhesive time, the stronger the viscosity will be.
5,Peel off the yellow protective film and press it at least 2 minutes then wait for about 2 hours before peel off the other side red film.If the red protective film is hard to peel off, please press it back once and try to peel off it again, don’t touch the gel with your hand after peel off.
Easy installation:
Step 1,Remove the residual glue.
Step 2,Clean&dry the car phone mount base completely.
Step 3,Tear off the yellow protective film.
Step 4,Stick it on the car phone mount base and press it at least 4 minutes for better connecting to the base,then wait for about 2 hours to tear off the other side red film.
Step 5,Clean and dry the smooth and hard flat surface thoroughly to ensure there is no dust or debris.
Step 6,Tear off the other side red protective film,Then stick it on the cleaned dash surface firmly and press it at least 5 minutes to ensure that the adhesive pad and the surface fully bond.It is recommended to wait for at least 24 hours before use.
If you hard to tear off the red protective film, please press it back ,then tear off it again.Don’t touch the gel with your hand after peel off the film.
Package include:
4 X 3M VHB adhesive pads
1 X use manual
6. MGQFY 4 PCS 80mm (3.15") Circular Double Side Sticker Dashboard Adhesive Replacement Compatible with Xiaoyi Camera/Car Mount/Windshield Pad Mounting Disk for Suction Cup Car Phone Holder Bracket GPS
Feature
- What you get:4 PCS Super Strong Double Side Sticker for Car Phone Mount Holder Bracket, GPS, Camera ,Wall holder, Dashboard Toys, Windshield,Tiles, Wall Pictures and more.
- Strong Adhesive Pads Compatible with xiaoyi camera ,Use widely:Double Sided Clear Acrylic Adhesive Disk Round Tough Sticky Tape Compatible with Mpow 033 car mount holder , Windshield Long Arm Car Phone Mount and other Car Phone Mount Holder Bracket ,GPS Camera ,Decorations, Dashboard Toys, Windshield,Tiles, Wall Pictures.Replacement Adhesive Kit for Long Arm Universal Magnetic Cradle Windshield Dashboard Cell Phone Mount Holder etc.
- CUT INTO ANY SIZE YOU NEED:You can cut pads into smaller pieces if need.
- Strong Adhesive and not leave a residue:Strong adhesive is strong yet leaves no residue when removal is required.
- These sticky pad can stick to lots of materials, such as wood, metals, glass, papers, and plastics and fabrics, etc.
Description
Package include:4 pieces Double Side Sticker Pad.
Double Side Sticker for Suction Cups for Car Bracket Mount Holder /GPS/Camera/Wall hook/and more
7. Metal Plate for Phone Car Magnetic Mount 6 Pack,Magnet Holder Disc Replacement Case Sticker with 3M Adhesive for iPhone Magnets Cradle-less Mounts Cell Phone Mini Tablet GPS Stand 2 Rectangle 4 Circle
Feature
- 1. Metal Plate for Magnetic Mount: GLAREE M3 Metal Plates can Attach your Cell Phones / Tablets / Pads / Navigation Devices onto Cars Magnetic Mount Easily. You can Stick them on Phone Back or Inside / Outside of Phone Cases’ Backing Firmly. ★ NOTE ★ The Metal Discs / Disk do NOT have Magnets, just Replacements Plates for Magnetic Car Mounts.
- 2. Cell Phone Magnetic Plate widely Compatible with: iPhone XS / XS Max / XR / X / 8 / 8 Plus / 7 / 7 Plus / 6S / 6S Plus / 6 / 6 Plus / 5S / 5C / 5 / SE / 4S / Samsung Galaxy S10 / S10e / S10 Plus / S9 / S9 Plus / S8 / S8 Plus / S7 / S7 Edge / Note 9 / Note 8 / LG / Moto and all Smart Phones / iPad / Mini Tablets.
- 3. Magnetic Plates widely Compatible with different Brand Phone Car Mount / Holders / Cradle-less / Stand / Magic Mount: WizGear / PopSockets / VAVA / Scosche Magicmount / Spigen / Anker / Maxboost / VOLPORT / Naztech / Koomus / iottie / Bestrix and more Located on Dashboard / Vents / CD Slot / Dash / Windshield / Windows.
- 4. Perfect Size Phone Magnet Stickers with strong Adhesive: Ultra-thin 0.5 mm in Thickness to Minimize your Phone’s Bulkiness. 2 Round 1.37″ for Small Smartphone, 2 Big Round 1.57″ for Middle Cellphone, especially Fit with PopSockets Grip Perfectly, 2 Flat Rectangle 2.56” X 1.77″ Standard Size for Big Mobile Phone and Larger Pad Devices.
- 5. What you get: 6 Packs Stylish Thin Magnetic Phone Car Mount Replacement Plate, 7 x 24-hour Friendly Customer Service, 30-day Free Refund / Replacement, 18-month Hassle-free Warranty.
8. Universal Metal Plate 12 Pack for Magnetic Phone Car Mount Holder Cradle with 3M Adhesive (Compatible with Magnetic Mounts) – 6 Rectangle and 6 Round, Black
Feature
- UNIVERSAL METAL PLATE: Easy to use with all magnetic car mount holder
- PACKAGE INCLUDES: Rectangle – 1.8″ x 2.6″ (6Pcs)
- Round one ‘s diameter – 1.6″ ( 6Pcs)
- STRONG 3M ADHESIVE: Each metal plate has strong 3M adhesives tape, Easy to stick onto the back of phone or case without a hassle
- WIDE COMPATIBILITY: All of the metal plates are not magnetic, we strongly recommend to use these metal plates along with universal magnetic mounts wherever you want
- IMPORTANT NOTE: Metal plate may disable WIRELESS CHARGING, if you stick it on the back of the phone/case,Suggest to take the case off when use wireless charging
Description
NOTE:
1. This item is PURELY a metal plate, which designed to work with magnetic mount. It’s NOT a magnet. 2. Clean and dry the surface of your phone/ phone case before sticking the plate on your device.
3. Suggest you Mount the metal plate inside your phone case for beautiful design. 4. The decorative metal plate with adhesive cannot not be used twice after removal.
Features: Great to use with all 3.5-6″ cellphones. They also work through a thin case.
Hold your GPS or tablets more stable with the rectangular metal plate or use two metal plates. Safely protect your devices or hands from scratching with the rounded edge.
Easy to attach and remove without a hassle.
Specification: 1. Material: Rust-Free Iron
2. Color: Black 3. Dimension:Rectangle – 1.8″x2.6″/45x65mm (6Pcs) ; Round one ‘s diameter – 1.6″/40mm ( 6Pcs)
Package Includes: 6xRectangular Adhesive metal plates.
6xRound Adhesive metal plates.
9. Mount Metal Plate with 3M Adhesive 5 Pack for Magnetic Cell Phone Car Mount, Stylish Universal Metal Disc Replacement Sticker for iPhone GPS Magnet Holder Cradle Stand 5 Round
Feature
- 1. Universal Metal Plate: The Magnetic Plate easily Attach your Device ( Smartphones, Tablets, Navigation device ) onto Magnetic Car Smartphone Mount / Holder / Stand / Magicmount of Dashboard, Vents, CD Slot or Windows. ★NOTE★ EASTSHINE H2 Metal Discs / Disk do not have Magnets, just Replacements Plates for Magnetic Cars Cradle-less.
- 2. Mount Metal Plate: Great to work with all Magnetic Phone Car Holders for Dash, Dashboard, Vent, CD slot, Windshield or Window. Widely Compatible with iPhone 11 / 11 Pro / 11 Pro Max / XS / XS Max / XR / X / 8 / 8 Plus / 7 / 7 Plus / 6S / 6S Plus 6 / 6 Plus / Samsung Galaxy S10 / S10e / S10 Plus / S9 / S9 Plus / S8 / S8 Plus / S7 / S7 Edge / Note 10 / Note 10+ / Note 9 / Note 8 / LG / Moto and all Mobile Phones.
- 3. Durable & Stable Magnet Sticker: Rust-Free Iron Material Ensure Strong Durability and Long Lifespan. Genuine 3M Adhesive Backing Provide Strong Stickiness to Attach on / Stick inside your Device / Cell Phone Case Safely.
- 4. Perfect Size Magic Plate: Ultra-thin 0.5 mm in Thickness to Minimize Bulkiness for your Smart Phone. 5 Round Circle Standard 35mm / 1.38 inch Size can be Suitable for both Smaller and Larger Devices / Cases.
- 5. What you get: 5 Packs Mount Metal Disc Replacement, 7 x 24 Hours friendly Customer Service, 30 Days Free Refund / Replacement.
Conclusion
By our suggestions above, we hope that you can found Cell Mount 3M for you.Please don’t forget to share your experience by comment in this post. Thank you!