Top 8 Dundas Jafine Proflex Indoor Dryer Vent Kit

This indoor dryer vent is designed to capture the lint from your electric clothes dryer, for those unable to vent to the outside. All types of indoor dryer vents will allow heat and humidity into the room. We recommend the user allow for air circulation and ventilation when operated in confined spaces. This patented double filter system does not use water, eliminating messy cleanups. The stainless steel screen acts as a pre-filter capturing large lint particles, pet hair, etc. and can be cleaned with a sweeping motion of the hand. The polyester filter will capture the finer lint dust and can be vacuumed clean for extended use or replaced when fully loaded with lint. Replacement filters are available in packages of 6, lasting most users up to a year under normal conditions. There is a patent pending “safety vent flap” designed to open, as a reminder to clean the screen and filter. For renters or homeowners concerned with dryer lines that exceed the dryer manufacturer’s recommendations, resulting in inefficient operation and lint accumulation, this is a great solution. Saves energy in colder months by returning warm dryer air into the room. All installation hardware included. Customer supplies hose and clamps. Installation is quick and easy, instructions included. If you’ve purchased this product in the last 30 days and one or both of the side clips is broken, please reach out to [email protected] for a replacement.

Product Description

Dundas Jafine TDIDVKZW ProFlex Indoor Dryer Vent Kit with 4-Inch by 5-Foot ProFlex Duct

From the Manufacturer

This ProFlex indoor dryer vent kit includes a 4-inch by 5-foot UL 2158A listed and marked ProFlex transition duct, a plastic lint reservoir, and 2 plastic clamps. This item is used to vent your electric dryer indoors when outside venting is not possible. It is ideal for apartments, condominiums, and RVs Never use this product with a gas clothes dryer.

Product Description

KIT INCLUDES; HOOD, PIPE, COLLAR, 8-FT UL LISTED 2158A DUCT & CLAMPS

From the Manufacturer

Deflector SK8WFW 8-Feet Super-flex Dryer Vent Kit.

What makes our Lint Trap Filter so unique is not only its ability to efficiently capture lint, but to filter the air from the dryer as well. It does this by using a patented fine screen and water drawer system which prevents fine particles of lint from recirculating back into the dryer causing damage or fires.
The screen also has the added benefit of recycling the heat from your dryer which will not only lessen your impact on the environment, but save you money on your next heating bill as well.

Our indoor dryer vent has a fine stainless steel screen does not need replacement, they will last as long as the unit. In addition, we’ve even made cleaning the screen an easy task to do.
By simply rotating the knob on the front of the unit once, you can scrape all of the lint off of the back of the filter without having to take it apart and having to touch any of the lint. The lint from the screen will be dropped in the water drawer (which already captured the dust and larger lint pieces). At this point all you have to do is empty the drawer, put fresh water in it and slide it back in place.
WATER? Yes, our lint trap filter uses water to cleanse the vented air of lint, fine particles and dust. Water provides a much better result than filters alone.
Some of our customers recommended putting a drop or two of their favorite essential oils into the water drawer, which will leave your house smelling great while you’re drying your clothes!
Hose and clamps not included

Please note: this unit is not recommended for gas dryers.

Product Description

“

Product Description

Indoor dryer venting Supurr-Flex UL listed 2158 clothes dryer transition duct non-tipping 2 clamps 4′ dia x 5-ft length foil duct built-in hanger. Designed for safe indoor dryer venting where outside venting is impossible. Quick, easy installation, fits most clothes dryer (not for use with gas dryers). If used in small rooms, open doors for adequate distribution of heat and moisture. Lint trap requires 4 cups of water for use. Transition duct, 2 clamps and lint trap are included. Imported.       

From the Manufacturer

This is a genuine replacement part. The model number and name for the following item is: Deflecto LTF Lint Trap.

“

From the Manufacturer

This is a genuine replacement part. The model number and name for the following item is: Deflecto LTF Lint Trap.

What makes our Lint Trap Filter so unique is not only its ability to efficiently capture lint, but to filter the air from the dryer as well. It does this by using a patented fine screen and water drawer system which prevents fine particles of lint from recirculating back into the dryer causing damage or fires.
The screen also has the added benefit of recycling the heat from your dryer which will not only lessen your impact on the environment, but save you money on your next heating bill as well.

Our indoor dryer vent has a fine stainless steel screen does not need replacement, they will last as long as the unit. In addition, we’ve even made cleaning the screen an easy task to do.
By simply rotating the knob on the front of the unit once, you can scrape all of the lint off of the back of the filter without having to take it apart and having to touch any of the lint. The lint from the screen will be dropped in the water drawer (which already captured the dust and larger lint pieces). At this point all you have to do is empty the drawer, put fresh water in it and slide it back in place.
WATER? Yes, our lint trap filter uses water to cleanse the vented air of lint, fine particles and dust. Water provides a much better result than filters alone.
Some of our customers recommended putting a drop or two of their favorite essential oils into the water drawer, which will leave your house smelling great while you’re drying your clothes!
Comes equipped with an 8 foot hose and 2 clamps.

Please note: this unit is not recommended for gas dryers.