Finding your suitable readers for electric drill press stand is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for electric drill press stand including detail information and customer reviews. Let’s find out which is your favorite one.
684 reviews analysed
1. Lukcase Floor Drill Press Stand Table for Drill Workbench Repair Tool Clamp for Drilling Collet,drill Press Table
- ✔This heavy duty drill stand is designed for use with power drills with collar diameter of from 38mm to 43mm（1.48” to 1.7”).With this drill stand, drilling at surfaces, round workpieces and boards can be done with absolute precision.
- ✔Substantially cheaper than purchasing a full drill press. This drill press stand has all the necessary features expected in a full-size drill press stand.
- ✔It includes separate adjustments for limiting press depth and drill height so you can change drill position with minimal risk of over-drilling into the stand.
- ✔The drill collar can be adjusted to suit a variety of tools and the stand is supplied with 3 different size collar inserts to suit smaller drills.
- ✔It has a sturdy metal column bar and base with slots for fitting a machine vice and 4 clamping points for mounting firmly with your worktable .It also features a depth adjustment scale and stop ith an adjustable scale ring for accurately setting the drilling depth, down to the last millimeter.
Depth gauge Plastic collar insert
Mounting Holes Allen key & holder – for adjustment
Type: Iron Bottom Bracket Min- Max Clamp : 38-43mm（1.48” or 1.7”）
Main Rod : 25*400mm Size : 400*155*155mm
Drilling depth: Up to 60mm Base: Cast Iron Base
Quantity: 1x Drill Bracket (electric drill in the picture is NOT included)
Place the base on a level floor,Place the column on the base as deeply as use the hex key M8 to tight the two pieces hex bolts on the side of base.(These are 4 holes on the base on the bench)
Clamp Drill Machine
Put the Electric Drill machine or Die Grinder into the clamp,according to the size of neck of the machine use different thickness of brush,and use the hex key to tight the clamp lock bolt 8. Screw the Handle(20) to the feed shaft 21and tighten it.
And try to press some times to check the head sliding need,add some grease on the sliding slot and adjust the 3pcs screw 14 on the sliding sporter.
Adjustment of height of Head
According to the workpiece height,Up or down the head assembly,and tight the head lock bolts 9 by hex key. (unplug the drill before any adjustment of this stand)
Adjust the height of Point clamp 2 to control the drill Max travel for this stand is 60mm. Adjust the head to bevel drilling and milling. Loosen the screws 24 between Colum and the Head to desired position,and tighten the screws.adjustment angle is 90 degree.Trial running machine before operation trial runs machine no loading before any operation.
Before operation,please be advised that your drill and our drill press stand are all assembled securely without no loosen.
2. Adjustable Drill Press Stand for Drill Workbench Repair Tool Universal Bench Clamp Support Tool, Drill Press Table, Drill Stand for Hand Drill Single Hole Aluminum Base (1 Mounting Hole)
- 【Material】Electric drill press stand constructed with aluminum alloy base,solid column bar,durable to use.
- 【Available Drill】Designed for use with electric drills with collar diameter of 38-43mm (1.7″or 1.5″),with black plastic ring for better fix.
- 【Drill Depth】Drilling depth up to 60mm(2.4″), single hole for mounting.
- 【Features】This drill stand is ideal for holding your drill steady during use and allows for much more precise drilling than hand-held operation.
- 【Package and Shipping】Pack of 1 set drill press stand per parcel.Need to assemble.Not including the electric drill.
3. MINIQ Bench Drill Stand 710W Mini Electric Bench Drilling Machine Drill Chuck 1-13mm
- Can be widely used model, wood boards, plastic sheeting, aluminum, composite panels, resin panels, thin metal, circuit boards, precision machining of hard materials and other non-specific drilling.
- Is hardware processing, mold making, document binding, electronic manufacturers, scientific experiments and other units of the ideal tool.
- This mini drill press with 6-Speed ranges. You can drill precise holes with this product and it is great for small and precise work. It is easier to use and more accurate than hand-held drills. It is useful for jewelers, woodworkers, mechanics, hobbyists, home, workshop, arts and crafts.
- Infinite speed selection within the machine\’s six speed ranges(0-2800r/min).
- Aluminum alloy base.
This mini drill press with 6-Speed ranges. You can drill precise holes with this product and it is great for small and precise work. It is easier to use and more accurate than hand-held drills. It is useful for jewelers, woodworkers, mechanics, hobbyists, home, workshop, arts and crafts.
Infinite speed selection within the machine\’s six speed ranges(0-2800r/min).
Aluminum alloy base.
Gear drive without belt design, power strong.
Power-off switch for added safety.
Can be widely used model, wood boards, aluminum, composite panels, resin panels, thin metal, circuit boards, precision machining of hard materials and other non-specific drilling. This is hardware processing, mold making, document binding, electronic manufacturers, scientific experiments and other units of the ideal tool.
Plug: US (optional)
Spindle Speed: 0-2800r/min
Drill Clamping Diameter: 1-13mm / 0.04-0.51in
Input Power: 710W
Spindle Travel: 60mm / 2.36in
Voltage: 110-220V, 50-60Hz
Drill Capacity: Woods: Ï30mm
Working Radius: 110mm / 4.33in
Material: aluminum alloy
Item Weight: 6000g / 12.22b
Package Weight: 6100g / 12.36lb
Package Size: 480 * 290 * 150mm / 18.90 * 11.42 * 5.91in
Please allow 10-30mm error due to manual measurement and make sure you do not mind before ordering.
The color of the actual items may slightly vary from the above images due to different computer screen, thanks for your understanding.
1 * Bench Drill
1 * English Manual
4. KKmoon High Precision Electric Power Drill Press Stand Table Rotary Tool Workstation Drill Workbench Repair Tools Clamp Work Station with 0-90 Degree Rotating Fixed Frame for Drilling Collet Table
- 0-90 Degree rotable to drill slant hole
- Copper plug readjustment to confirm the precision and durable.
- Clamping range: 38mm-43mm, easy to fix the electric drill or grinder.
- Precise scale for better working & precise drilling, transparent pointer & spacing function.
- Copper plug readjustment to confirm the precison and durable.Precise graduation:transparent pointer,spacing fuctuion
5. Sealey DS01 Drill Stand
- Drill stand with cast iron base for vertical drilling using a hand drill
- Supplied with 65mm drill vice with quick jaw release.
- Features a preset depth control and stop for drilling depths of up to 60mm, ideal for accurate and repetitive drilling.
- For use with hand drills with a collar diameter of 38mm if used with the adaptor bush or 43mm if used without
Drill stand with cast iron base for vertical drilling using a hand drill. Supplied with drill vice which mounts onto the base to secure the workpiece. Features a preset depth control and stop for drilling depths of up to 60mm, ideal for accurate and repetitive drilling. For use with hand drills with a collar diameter of 38mm if used with the adaptor bush or 43mm if used without. Drill vice features a quick jaw release feature to allow fast and easy adjustment to suit the workpiece.
6. WEN 4208 8 in. 5-Speed Drill Press
- Includes a 1/2-inch keyed chuck and onboard key storage
- Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
- Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations
- Durable 1/3 HP induction motor develops ample torque and power
- 6-1/2 x 6-1/2″ worktable is height adjustable and bevels up to 45 degrees left & right
- Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP.
Remember when power tools were actually powerful? WEN’s 8-inch swing, 5-speed drill press is small but powerful enough to drill through metal, wood, plastics, and other materials. Max drill capacity is 1/2” in 1” thick cast iron. When you need accurate, repeatable holes, this tool will do the job more conveniently and precisely than a hand held drill. The perfect size for the shop and portable enough to take to the job. Constructed with a rigid frame consisting of cast iron: head, table, and base ensuring accurate holes. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The ½” chuck with JT33 spindle taper gives you versatility with a variety of bits. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. The base contains predrilled holes for mounting onto a bench or work stand. The slotted table allows for mounting clamps and vises for effective workholding. Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Remember when you could drill holes in any material with ease? Remember WEN.
7. Hoteche Drill Stand Press Holder Benchtop Rotary Tool Workstation
- Hobby tools, Ideal for Rotary tools, Power Drill, benchtop, perfect for home garage use.Aluminum base with slots and 2 holes for mounting,More Accurate drilling than hand-held operation.
- Max. Holding diameter: 43mm (1.7”)
- Max. Drilling depth: 60mm (2.4”)
- Overall Height: 400mm (15.7”)
- Shaft diameter: 25mm (1”)
- Base size: 150mm x 150mm (6” x 6”)
- Rocker size: 14-1/2 in. x 3/4in. x 1/8in. Hex wrench 5mm included.
- Hold drill chuck’s size 1/2″ or 3/8″, cannot hold chuck’s size 3/4″ or bigger.
- Power drill NOT included.
Features: Ideal for Power Drill, benchtop, perfect for home garage use. Aluminum base with slots and 2 holes for mounting. More Accurate drilling than hand-held operation. Specification: Max. Holding diameter: 43mm (1.7”); Max. Drilling depth: 60mm (2.4”); Overall Height: 400mm (15.7”); Shaft diameter: 25mm (1”); Base size: 150mm x 150mm (6” x 6”); Rocker size: 14-1/2 in. x 3/4in. x 1/8in. Hex wrench 5mm included. Power drill NOT included.
8. Milescraft 1097 Tool Stand Drill Press for Rotary Tools
- Sturdy metal head fits most Dremel style rotary tools
- Spring loaded metal rack and pinion gearing for smoothe controlled drilling
- Scale with depth stop allows precised depth control and repeatability
- The steel 13-1/2″ support column of the ToolStand, fits securely into a 6″ x 6″ formed steel base plate whose surface and mounting platforms have been planed to ensure a level work surface
- Lock tools in horizontal position for hands free use
Elevate Your Rotary Tool’s Performance to “Machine Tool” Standards with the ToolStand! Transform a handheld rotary device into a precision drilling machine with the rotary ToolStand. This stand is compatible with most Dremel-style rotary tools. The ToolStand acts as a drill press to cut perfectly perpendicular holes while a depth-stop gauge makes repetition a cinch.
From the Manufacturer
Use most rotary tools as a small scale precision drill press. Rack and pinion gearing allows smooth controlled plunge. Scale with depth stop allows depth control and precise repeatability. Sturdy cast aluminum base provides sturdy work area. Stong 13.5 inch metal tube allows drilling of objects up to 5 inches in height. Lock rotary tool in horizontal position for hands free sanding or polishing.
9. SKIL 3320-01 3.2 Amp 10-Inch Drill Press
Skil 3320-02 10″ Drill PressSkil Benchtop Power Tools are Quality Tools at a Great Price!Skil 3320-02 10″ Drill Press Features: 3.2 amp motor LaserX2 2 Beam Laser System Depth Adjustment System Variable Speed-570-3,050 RPM 0-45 degrees left and right tilting work surfaceSkil 3320-02 10″ Drill Press Specifications: Includes 10-in Drill Press with Laser Cast Iron Base and Work Table (2) AA Batteries Chuck Key
From the Manufacturer
Skil Benchtop Power Tools are Quality Tools at a Great Price !
10. Dremel 220-01 Rotary Tool Workstation Drill Press Work Station with Wrench
- Articulating Drill Press- Drills Perpendicular and Angled Holes in 15-degree Increments, up to 90 Degrees Horizontal
- Tool Holder- Holds Tool at 90 Degrees Horizontal for Tasks Such as Polishing Metal Objects, Sanding Different Shapes and Grinding Metal Piece. Drill Depth- 2 Inches
- Flex Shaft Tool Stand- Allows Telescopic Adjustment to Any Height Between 16 and 29 Inches, Crow’s Nest Provides On-board Storage for Drill Bits, Wrenches, and Other Dremel Accessories
- Cord Management Clips – for Safe Storage of Power Cords, Inch/Metric Marking on Base – For Accurate Drilling of Workpiece, Depth Markings with Depth Stop – for Consistent Depth, Sturdy Metal Base with 4 Clamping Points – to Securely Hold the Station
- Compatible with Dremel Rotary Tool models 100, 200, 275, 285, 300, 395, 398, 400, 800, 3000, 4000, 4200, 8100, 8200, 8220
It’s a drill press, tool holder and flex shaft holder all in one. Drill accurate perpendicular and angled holes. Holds your tool in place for applications like sanding and buffing, and the telescoping flex shaft holder extends to any height between 16 and 29 inches.
By our suggestions above, we hope that you can found Electric Drill Press Stand for you.Please don’t forget to share your experience by comment in this post. Thank you!