Finding your suitable readers for how to turn an old refrigerator into a kegerator is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for how to turn an old refrigerator into a kegerator including detail information and customer reviews. Let’s find out which is your favorite one.
867 reviews analysed
1. New and Improved Eva-dry E-333 Renewable Mini Dehumidifier
Description
This mini dehumidifier has been design to adsorb moisture from small enclosed areas (maximum area: 10’x 10′). It will help protect clothes and valuables from the damaging effects of mold/mildew and moisture rot. It is 100% renewable and needs no power to operate. Just hang the eva-dry unit in a closet, or you can place it in other small enclosed spaces, and it will start to adsorb moisture. There are no batteries required or cords to plug in, the unit works without power. There is an indicator window with special “moisture meter crystals” that change from orange (when dry) to green (when wet) to indicate when the unit needs to be “renewed”. The unit will adsorb approximately 8 to 10 ounces of moisture (depending on humidity levels this should take between 3 – 8 weeks). Once the moisture has been adsorbed it cannot leak or spill. This unit uses a specialized engineered crystallized silica gel that is odorless, non-toxic and completely safe. When the indicator crystals turn Green it is time to “re-new” the unit. Simply remove the unit from where it is adsorbing moisture and plug it into a power outlet.
2. Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
Feature
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Description
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
3. Ventamatic XXFIRESTAT 10-Amp Adjustable Programmable Thermostat with Firestat for Power Attic Ventilators, Replacement Thermostat
Feature
- FIRESTAT THERMOSTAT: The Ventamatic Firestat Thermostat controls power attic ventilators. The Firestat Temperature Range is 183°F at which point it cuts off the appliance.
- ADJUSTABLE THERMOSTAT: The Thermostat is adjustable by the use with a simple screw driver adjustment. It has adjustable bi-metallic switch.
- ENERGY EFFICIENT POWER ATTIC VENTILATOR: It provides energy-efficient operation of power attic ventilators and the temperature ranges from 50°F to 120°F.
- REPLACEMENT THERMOSTAT: This Ventamatic Replacement Thermostat controls power attic ventilators to promote the equalization of temperatures inside and outside your attic. Firestat safety feature shuts fan off at 183F Controls up to three units, not to exceed 10 amps.
- PROGRAMMABLE THERMOSTAT WARRANTY: This thermostat provides 10 years of warranty. It is of opening size 4.8 x 2.5 x 4.8 inches
Description
Product Description
Specification: • Overall Dimension: 4.8 x 2.5 x 4.8 inches • Item Weight: 1 pound • Size: 10 • Color: White • Power Source: Corded-electric • Temperature: 50°F to 120°F • Voltage: 120 volt • Warranty: 10 Years This Ventamatic Replacement Thermostat controls power attic ventilators to promote the equalization of temperatures inside and outside your attic. Temperature Range F 183, Accessory Type Ventilation accessory. Firestat safety feature shuts fan off at 183F Controls up to three units, not to exceed 10 amps. It provides energy-efficient operation of power attic ventilators Temperature range from 50 degrees to 120 degrees Fahrenheit Temperature is fan On/Off 10-Amp adjustable thermostat Adjustable bi-metallic switch Product Description This Ventamatic Replacement Thermostat controls power attic ventilators to promote the equalization of temperatures inside and outside your attic. Temperature Range F 183, Accessory Type Ventilation accessory. Firestat safety feature shuts fan off at 183F Controls up to three units, not to exceed 10 amps. From the Manufacturer 10-Amp automatic adjustable thermostat with Firestat. For the energy efficient control of roof or gable power attic ventilators. Temperature range from 50 to 120 Degree Fahrenheit.
From the Manufacturer
10-Amp automatic adjustable thermostat with Firestat. For the energy efficient control of roof or gable power attic ventilators. Temperature range from 50 to 120 Degree Fahrenheit.
4. New and Improved Eva-dry E-500 Renewable Mini Dehumidifier
5. AC Infinity AXIAL 1225, Quiet Muffin Fan, 120V AC 120mm x 25mm Low Speed, for DIY Cooling Ventilation Exhaust Projects
Description
Product Description
The heavy duty axial fan kit is designed for custom projects and as a replacement fan. The fan runs on 100 to 125V AC and contains everything needed to easily mount the fan and power it through a wall outlet. Includes a 4 foot power cord that can be easily attached to the fan’s metal terminals and allows it to be powered through a wall outlet. The plug cord can also be cut and be converted into lead wires to be connected to a wired AC power source. Also includes two 120 millimeter metal fan guards and a mounting screw set. AC Infinity fans are certified by CE, UL, TUV, and RoHS.
Heavy Duty Construction
The fan’s housing is constructed of die-cast aluminum painted black and able to perform well in harsh environments and withstand shocks. Its impeller and blades are molded with thermoplastic and meets UL 94 standards for resistance to flammability. Impedance protected motors contains windings that have a higher resistance to heat during a rotor lock. Containing long life dual ball bearings, the fans can be run continuously for 67,000 hours and be mounted in any direction.
Applications
This low speed fan is suitable in applications that requires a lower noise level and can accept a weaker airflow. Popular uses include theater cabinets, woodstove heaters, room to room doorways, amplifiers, kegerators, and more. Because this is a standard industrial size fan, it can be used to replace fans found in various electronics and machinery.
6. Inkbird 10A 110V Digital Thermostat with Heat and Cool Relays ITC-308 Home Brewing
Feature
- [Convenient Design] Plug and play, easy to use.
- [Reading Mode] Support reading with Centigrade or Fahrenheit unit.
- [Safe] Maximum output load: 1100W(110V).
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
7. Nashone Wireless Temperature Controller,Electric Thermostat with Remote Control Built in Temp Sensor 3 Prong Plug LCD Display Heating Cooling Mode(wirelss thermostat)
Feature
- REMOTE CONTROL.ON and OFF just need to click button. Control distance reach 40 meters with the sensor in open area and certified by FCC
- SMART TEMPERATURE MEASUREMENT. Built-in temperature sensor, ambient temperature detected automatically by remote controller, appliance stop to heat or cool after current temperature equal target temperature
- MULTIPLE SAFETY PROTECTION.3-Prong socket with grounded terminal, recoverable overload short circuit and Max load current up to 15A.Supply security alarms in unattended operation
- EASY TO READ AND INSTALL. Accurate reading for LCD display with back light. Wall mounted or table stand, user-friendly installation
- WHAT YOU WILL GET.Wireless thermostat outlet, remote control, user manual, 18 month warranty for quality-related issues and 45 days money back guarantee
8. Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding
Feature
- Plug and play design, easy to use
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Support reading with Centigrade or Fahrenheit unit
- Maximum output load: 1100W(110V)
- Dual display window, be able to display measured temperature and set temperature at the same time
9. AC Infinity AXIAL 8038, Quiet Muffin Fan, 120V AC 80mm x 38mm Low Speed, for DIY Cooling Ventilation Exhaust Projects
Feature
- Designed for projects that requires cooling or ventilation
- or as a replacement fan for various products.
- Includes a heavy-duty aluminum fan with power plug cord, two fan guards, and mounting screw set.
- Dual-ball bearings have a lifespan of 67,000 hours and allows the fans to be laid flat or stand upright.
- Low Speed: Has a lower noise and airflow rating than high speed models.
- 80 x 80 x 38 mm (3.2 x 3.2 x 1.5 in.) | 100 to 125V AC | Airflow: 23 CFM | Noise: 28 dBA | Speed: 2000 RPM
Description
Product Description
The heavy duty axial fan kit is designed for custom projects and as a replacement fan. The fan runs on 100 to 125V AC and contains everything needed to easily mount the fan and power it through a wall outlet. Includes a 4 foot power cord that can be easily attached to the fan’s metal terminals and allows it to be powered through a wall outlet. The plug cord can also be cut and be converted into lead wires to be connected to a wired AC power source. Also includes two 80 millimeter metal fan guards and a mounting screw set. AC Infinity fans are certified by CE, UL, TUV, and RoHS.
Heavy Duty Construction
The fan’s housing is constructed of die-cast aluminum painted black and able to perform well in harsh environments and withstand shocks. Its impeller and blades are molded with thermoplastic and meets UL 94 standards for resistance to flammability. Impedance protected motors contains windings that have a higher resistance to heat during a rotor lock. Containing long life dual ball bearings, the fans can be run continuously for 67,000 hours and be mounted in any direction.
Applications
This low speed fan is suitable in applications that requires a lower noise level and can accept a weaker airflow. Popular uses include theater cabinets, woodstove heaters, room to room doorways, amplifiers, kegerators, and more. Because this is a standard industrial size fan, it can be used to replace fans found in various electronics and machinery.
10. AC Infinity AXIAL LS1238, Quiet Muffin Fan, 120V AC 120mm x 38mm Low Speed, for DIY Cooling Ventilation Exhaust Projects
Feature
- Designed for projects that requires cooling or ventilation
- or as a replacement fan for various products.
- Includes a heavy-duty aluminum fan with power plug cord, two fan guards, and mounting screw set.
- Dual-ball bearings have a lifespan of 67,000 hours and allows the fans to be laid flat or stand upright.
- Low Speed: Has a lower noise and airflow rating than high speed models of the same size.
- 120 x 120 x 38 mm (4.7 x 4.7 x 1.5 in.) | 100 to 125V AC | Airflow: 62 CFM | Noise: 32 dBA | Speed: 1800 RPM
Description
Product Description
The heavy duty axial fan kit is designed for custom projects and as a replacement fan. The fan runs on 100 to 125V AC and contains everything needed to easily mount the fan and power it through a wall outlet. Includes a 4 foot power cord that can be easily attached to the fan’s metal terminals and allows it to be powered through a wall outlet. The plug cord can also be cut and be converted into lead wires to be connected to a wired AC power source. Also includes two 120 millimeter metal fan guards and a mounting screw set. The AC Infinity axial fan is UL recognized under certificate E503903, and also CE and RoHS certified.
Heavy Duty Construction
The fan’s housing is constructed of die-cast aluminum painted black and able to perform well in harsh environments and withstand shocks. Its impeller and blades are molded with thermoplastic which have a high resistance to flammability Impedance protected motors contains windings that have a higher resistance to heat during a rotor lock. Containing long life dual ball bearings, the fans can be run continuously for 67,000 hours and be mounted in any direction.
Applications
This low speed fan is suitable in applications that requires a lower noise level and can accept a weaker airflow. Popular uses include theater cabinets, woodstove heaters, room to room doorways, amplifiers, kegerators, and more. Because this is a standard industrial size fan, it can be used to replace fans found in various electronics and machinery.
Conclusion
By our suggestions above, we hope that you can found How To Turn An Old Refrigerator Into A Kegerator for you.Please don’t forget to share your experience by comment in this post. Thank you!