Finding your suitable readers for kegerator regulator two outlets is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for kegerator regulator two outlets including detail information and customer reviews. Let’s find out which is your favorite one.
818 reviews analysed
1. Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
Feature
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Description
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
2. Taprite T752HP Two Product Dual Pressure Kegerator CO2 Regulator
Feature
- Large easy adjusting knob to increase or decrease delivery pressure
- Each regulator has a sentry shut-down safety built into the body that instantly protects the dispensing system in the unlikely event of regulator failure
- Outlet features shut-off with back flow check valve and 5/16″ I.D. hose barb nipple
- Permanent quad-ring seal on inlet nipple helps eliminate leaks, no need to use a fiber washer each time tanks are changed
- Blow-off is factory set at 55-65 psig
Description
The TAPRITE ADVANTAGE Taprite regulators are built and tested in accordance with UL Standard 252 for compressed gas Regulators and UL 252A for compressed gas regulator accessories All Taprite regulator components and accessories are inspected by our Quality Department upon receipt in accordance with the requirements of MIL-STD-105E High CO volumetric flow provides continuity in product dispensing Polycarbonate bonnet will not chip, break, or fade 10 Micron Filter built in to keep contaminants out of regulator One repair kit for primary and secondary regulators. WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING.
3. SPARC Premium Dual Output CO2 Regulator CGA320 2YR USA Warranty Beer Kombucha
Feature
- EASY INSTALLATION: All you need to install this CO2 Pressure Regulator is an adjustable wrench. Each unit is supplied with 2 O-ring washers. Always place a washer between the lock-down nut and the tank to ensure a tight seal. Replace washers regularly.
- PROFESSIONAL GRADE: This CO2 Regulator fits all standard CO2 tanks with CGA-320 inlets. You can adjust the working pressure in both of your systems via a control knobs in the front. Gas Shut Off Valve for easy keg/tank swaps. Safety Pressure relieve valve/Chrome Shut Off Valve to prevent beer from backing up into the gas lines.
- VERSATILE APPLICATIONS: Works with 15.5 Gallon Kegs, 5 Gallon Kegs, 1.75 Mini Kegs, Half Barrels and Quarter Barrel Units. Barbed Gas Outlet Fitting Allows easy connection to many gas line types.
- HEAVY DUTY WITH TRIPLE GAUGES: SPARC 2 Stage CO2 Pressure Regulator is a heavy duty piece made with triple gauges to accurately measure working pressure in 2 systems simultaneously and 1 gauge showing CO2 tank pressure.
- WARRANTY: SPARC 2 Year USA Warranty. Call us with any problems!
Description
The SPARC 2 Stage CO2 Regulator is specifically designed for simultaneous use with 2 draft beer/kombucha setups (kegs or fermentation tanks). This CO2 regulator is equipped with 3 gauges: 1 for the working pressure in your 1st keg or fermentation tank, 1 for the working pressure in your 2nd keg or fermentation tank, as well as 1 for showing the pressure in your CO2 tank. This regulator attaches to standard North American CO2 gas tanks with a male thread (standard CGA-320 connection). Red knobs on the regulator lets you adjust the working pressure without any additional tools in each individual kegs/fermentation tanks. Professional polished finish. 2 year USA SPARC Warranty.
4. Taprite CGR263 2 Product High Volume Primary CO2 Regulator-Polycarbonate Body, Brass
Description
Tap 2 kegs at the same time from one regulator. Taprite high flow regulator with 2 outputs. Each output has separate shutoff valve. Manufactured in United States.
5. Taprite 1/4" Barb Outlet Primary Beer Soda Co2 Tank Tap Regulator 160# 2000# High Pressure
Description
Taprite160 pound 2000 pound High Pressure Primary Beer Soda Co2 Tank Regulator WARNING: This product can expose you to chemicals, including lead, which is known to the state of California to cause cancer, birth defects and reproductive harm. For more information please visit: www.Prop65Warnings.ca.gov
6. TerraBloom CO2 Keg Pressure Regulator for Draft Beer Kegerators. Dual Gauge Heavy Duty Unit with CGA-320 Inlet, 0-50 PSI Working Pressure, 0-3000 PSI Tank Pressure with Safety Pressure Relief Valve
Feature
- HEAVY DUTY WITH DUAL GAUGES: TerraBloom CO2 Pressure Regulator for Draft Beer Setups is a heavy duty unit made with double gauges to accurately measure working pressure in the system and CO2 tank pressure.
- PROFESSIONAL GRADE: This CO2 Regulator fits all standard CO2 tanks with CGA-320 inlets. You can adjust the working pressure in your system via a control knob in the front. Gas Shut Off Valve for easy keg/tank swaps. Safety Pressure relieve valve/Chrome Shut Off Valve to prevent beer from backing up into the gas lines.
- EASY INSTALLATION: All you need to install this CO2 Pressure Regulator is an adjustable wrench. Each unit is supplied with 2 O-ring washers. Always place a washer between the lock-down nut and the tank to ensure a tight seal. Replace washers regularly.
- VERSATILE APPLICATIONS: Works with 15.5 Gallon Kegs, 5 Gallon Kegs, 1.75 Mini Kegs, Half Barrels and Quarter Barrel Units. Barbed Gas Outlet Fitting Allows easy connection to many gas line types.
- WARRANTY: TerraBloom 30-day money back guarantee. 1 Year Warranty Against Manufacturing Defects.
Description
TerraBloom CO2 Regulator is specifically designed for use in draft beer setups. This CO2 regulator is equipped with 2 gauge displays: 1 for showing the working pressure in your draft beer setup as well as 1 for showing the pressure in your CO2 tank. This regulator attaches to standard North American CO2 gas tanks with a male thread (standard CGA-320 connection). Red knob on the regulator lets you adjust the working pressure without any additional tools.
7. 4-Way Gas Manifold CO2 Distributor Manifold 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves Homebrew Beer Making Brewing Tool
Feature
- ???? Gas Manifold, A built-in check valve protects your shunt and prevents gas backflow.
- ???? Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.)
- ???? Run multiple lines from one CO2 source. The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve.
- ???? There is a 2-point screw hole on the top for easy installation to other equipment. 5/16″ barbed inlet and 5/16″ barbed outlets.
- ???? Made of aluminum, brass and stainless steel material, it is extremely durable.100% Satisfaction Guarantee: 24 hours a day after-sales customers service, please contact us for any questions.
8. Bev Rite Air Distributor 5/16", CO2 Manifold – 2 way
Description
Run multiple lines from one CO2 source. The distributor allows you to split gas supply into multiple lines. Each line has its own shutoff valve.
9. FamYun Dual Gauge Co2 Draft Beer Dispensing Regulator – Primary High Pressure Double Gauge Mixed Gas Co2 Regulator CGA320
Description
You can use this primary regulator on any CO2 tank with a CGA-320 valve.
CO2 tanks have a male thread (CGA-320); these regulators have a female thread.
This regulator features dual gauges to measure PSI as well as the volume of CO2 in the cylinder, indicating how much CO2 is left in the cylinder and when you should have it refilled.
The knob on the front is used to adjust the output pressure.
10. Inkbird 10A 110V Digital Thermostat with Heat and Cool Relays ITC-308 Home Brewing
Feature
- [Convenient Design] Plug and play, easy to use.
- [Reading Mode] Support reading with Centigrade or Fahrenheit unit.
- [Safe] Maximum output load: 1100W(110V).
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
Conclusion
By our suggestions above, we hope that you can found Kegerator Regulator Two Outlets for you.Please don’t forget to share your experience by comment in this post. Thank you!