Finding your suitable readers for kit kegerator 2 vias is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for kit kegerator 2 vias including detail information and customer reviews. Let’s find out which is your favorite one.
506 reviews analysed
1. Inkbird Temperature Controller ITC-608T Pre-Wired AC Dual Stage Outlet Thermostat with 12 Period Time Stage 1800W ETL Listed Homebrew Reptile Breed
Feature
- ????????US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
- ????????Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
- ????????Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
- ????????More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
- ????????Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
2. UP100 Homebrew Cornelius Style Keg Carbonation Lid Kit With 0.5 Micron Diffusion Stone
Feature
- Stainless steel 0.5 Micron Carbonation Diffusion Stone
- Keg Lid with stainless Ball Lock Post, Silicon Keg lid Seal
- Replace your old bent,dented,or leaking lids.
- Easy Speedy carbonation. No need to shake your keg with this keg lid kit.
- Release pressure to remove lid. Working pressure 130 PSI (900 kPa)
Description
Install the kit into the opening of a keg and simply attach gas disconnect to the tank plug on the lid. Set the regulator to the desired CO2 setting and wait until desired carbonation level is achieved in the beverage.
The Carbonation Lid Kit provide the quickest and easiest means of force carbonating kegs and begin serving beer swiftly. Fits all normal Corny kegs. The keg lid with built-in carbonation stone! Move the lid from keg to keg to carbonate as needed.
This lid allows fast force carbonation with the minimum of effort. The lid comes with 2 feet hose and stone already attached.
3. Inkbird WiFi ITC-308 Digital Temperature Controller Thermostat,Remote Monitoring Controlling,Home Brewing&Fermentation,Breeding&Incubation,Greenhouse,Support Amazon Alexa,Google Assistant,IFTTT
Feature
- ✨✨[WIFI & APP] WIFI smart controller supports both IOS & Android，WIFI supports 2.4GHz Wi-Fi router, free APP “InkbirdSmart” which is able to control temperature at any time. Support Amazon Alexa, Google Assistant and IFTTT.
- ✨✨[Dual Relay Output] Dual relay output, which can connect heating and cooling device at the same time.
- ✨✨[Alarm for Safe] High/Low temperature limit setting alarm.
- ✨✨[Convenient Design] Plug-n-play, easy to use. Support ℃/℉reading and Temperature calibration.
- ✨✨[Long Warranty] The controller itself has 2 years warranty while the temperature sensor has 1 year warranty. Maximum output load: 1100W(110V).
Description
Feature：
●Plug and play design, easy to use.
●Support reading with Centigrade or Fahrenheit.
●Maximum output load: 1100W(110V).
●Temperature calibration, Compressor delay protection for refrigeration control.
●High and low temperature alarms are available.
●Dual relay output, be able to connect with refrigeration and heating equipment at the same time.
●Dual display window, be able to display measured temperature and set temperature at the same time.
●Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
●WIFI smart controller supports both IOS & Android，WIFI supports 2.4GHz Wi-Fi router, free APP “InkbirdSmart” which is able to monitor temperature at any time.
Technical Parameters:
●Power: Voltage: 100~230Vac，50/60Hz, Current: 10A, Max Wattage: 1200W(110Vac), 2200W(220Vac)
● Type of temperature probe: R25℃=100KΩ±1%, R0℃=26.74~27.83KΩ,B25/85℃=3435K±1%
● Temperature measurement range:-40℃~100℃/-40℉~212℉
● Temperature display accuracy: 0.1℃ /℉(<100℃ ),="" 1℃/℉(="">=100℃/℉)
● Display unit: Celsius ℃ or Fahrenheit ℉
● Ambient temperature: -20℃~60℃/-4℉~140℉
● Storage environment: temperature:0℃~60℃/32℉~140℉;
humidity: 20~80%RH(Unfrozen or condensation )
● Warranty:Controller:2 years warranty ；Temperature Probe:1 year warranty
Package Included:
1 x WIFI ITC-308 Temperature Controller
1 x Manual
4. Mini Keg Dispenser with Regulator by The Weekend Brewer
Feature
- BETTER BEER. Maintaining CO2 pressure is vital to keeping your beer tasting great.
- DISPENSE OR FORCE CARBONATE. Use this tap and mini-regulator to dispense or carbonate your craft beer or homebrew.
- PRECISION PRESSURE. Utilizing a mini-regulator ensures you get the proper carbonation.
- COMPATIBLE. Fits most inner threaded mini-kegs sold on Amazon. Search B07664MMXT on Amazon to find a great PERSONALIZED 5L mini keg to pair with this dispenser.
- CO2 cartridges and mini-keg sold separately. Search B01N0EYKMM on Amazon for our cartridges.
Description
Are you tired of your craft beer getting flat in your mini keg before you get to the bottom? No need to drink flat beer any longer. With this Mini-Keg tap you can dispense from your mini-keg without breaking the bank. Insert a 3/8″ threaded CO2 cartridge and you are ready to go. This tap will fit most standard mini-kegs that feature an inner threaded opening. Search B07664MMXT on Amazon for a great PERSONALIZED 5L mini keg compatible with this system.
5. Royal Brew Nitro Cold Brew Coffee Maker Home Keg Kit System
Feature
- NITRO BREW: Enjoy the great taste of Nitro Brew coffee, without paying at a coffeeshop each time! Enjoy unlimited home brews: by adding Nitrous Oxide or Nitrogen, your cold brew coffee will taste better and stay fresh MUCH longer!
- GREAT TASTE: Modeled after stout beer dispensing systems, featuring a special gas blend and stout beer faucet that work together to create a super-smooth, rich body with a foamy top similar to your favorite draught beer. Enjoy a frothy iced coffee without the need of creamer, dairy, or sweeteners!
- THE ORIGINAL & #1 MODEL: Beware of copycats, we’re the original model, check our videos and great reviews! Attractive, durable matte flat black finished, food grade stainless steel 64 oz keg
- coffee spear with unique pressure relief valve
- upgraded stout creamer faucet
- Nitrogen (N) cartridge holder casing
- Faucet/Tower Combo Wrench
- Cleaning Brushes
- Plastic hose (Make sure it is cut to only 20 cm long!)
- COMPATIBILITY: Use one 8g N20 (Nitrous Oxide) Cartridge or two 2g N (Nitrogen) Cartridges, for best results use 1 x FOMA N2O cartridges (Search B07H6MC1NF on Amazon) or any Nitrous Oxide cartridge (not included). Also works with Nitrogen, but we recommend N2O Nitrous Oxide for cascading foam! The Royal Brew is compatible with most 8g nitrous oxide capsules. Important: To allow gas to form, only fill the keg up to 50%-75% maximum with coffee! Use one N2O Cartridge per batch (or 2 N cartridges).
- LIFETIME WARRANTY: American owned with 100% USA support! Message us 24/7 via Amazon for full support and service! Check the product videos on this page or search Royal Brew on youtube for troubleshooting videos
6. The Weekend Brewer 4-way 1/4" Barb CO2 Distributor Manifold with integrated check valves
Feature
- LIGHT AND DURABLE aluminum body is lighter than steel but remains durable and long lasting. Aluminum is the industry standard for CO2 manifolds for their strength and resistance to corrosion. This manifold is ideal for homebrewers, bars, or anyone who is looking to easily split gas for beer or beverage dispensing and even for force carbonation.
- INTEGRATED HIGH QUALITY CHECK VALVE OUTPUTS prevent liquid from flowing into the manifold and your regulator. Don’t worry about dirty lines or ruined regulators ever again! Every integrated check valve ensures that your beer stays on the right side of the line.
- NO LEAKS due to ample thread tape and vigorous water testing after assembly. All manifolds are internally cleaned before assembly for the purest air possible. Don’t settle for mass produced, low quality manifolds from overseas. The Weekend Brewer manifold is the highest quality manifold on the market due to rigorous testing and quality control.
- MOUNTING HOLES allows for easy installation on walls or kegerators. Two screws or nails will easily secure your manifold to any surface for ease of use.
- MADE IN THE USA These manifolds are assembled by American workers in our Fayetteville, AR facility.
7. SPARC Premium Dual Output CO2 Regulator CGA320 2YR USA Warranty Beer Kombucha
Feature
- EASY INSTALLATION: All you need to install this CO2 Pressure Regulator is an adjustable wrench. Each unit is supplied with 2 O-ring washers. Always place a washer between the lock-down nut and the tank to ensure a tight seal. Replace washers regularly.
- PROFESSIONAL GRADE: This CO2 Regulator fits all standard CO2 tanks with CGA-320 inlets. You can adjust the working pressure in both of your systems via a control knobs in the front. Gas Shut Off Valve for easy keg/tank swaps. Safety Pressure relieve valve/Chrome Shut Off Valve to prevent beer from backing up into the gas lines.
- VERSATILE APPLICATIONS: Works with 15.5 Gallon Kegs, 5 Gallon Kegs, 1.75 Mini Kegs, Half Barrels and Quarter Barrel Units. Barbed Gas Outlet Fitting Allows easy connection to many gas line types.
- HEAVY DUTY WITH TRIPLE GAUGES: SPARC 2 Stage CO2 Pressure Regulator is a heavy duty piece made with triple gauges to accurately measure working pressure in 2 systems simultaneously and 1 gauge showing CO2 tank pressure.
- WARRANTY: SPARC 2 Year USA Warranty. Call us with any problems!
Description
The SPARC 2 Stage CO2 Regulator is specifically designed for simultaneous use with 2 draft beer/kombucha setups (kegs or fermentation tanks). This CO2 regulator is equipped with 3 gauges: 1 for the working pressure in your 1st keg or fermentation tank, 1 for the working pressure in your 2nd keg or fermentation tank, as well as 1 for showing the pressure in your CO2 tank. This regulator attaches to standard North American CO2 gas tanks with a male thread (standard CGA-320 connection). Red knobs on the regulator lets you adjust the working pressure without any additional tools in each individual kegs/fermentation tanks. Professional polished finish. 2 year USA SPARC Warranty.
8. Dual System 2 Stage CO2 Pressure Regulator For Draft Beer Regulators and Kombucha Set Ups. Connect 2 Systems to 1 Tank. CGA-320 Connection
Feature
- HEAVY DUTY WITH TRIPLE GAUGES: TerraBloom 2 Stage CO2 Pressure Regulator is a heavy duty unit made with triple gauges to accurately measure working pressure in 2 systems simultaneously and 1 gauge showing CO2 tank pressure.
- PROFESSIONAL GRADE: This CO2 Regulator fits all standard CO2 tanks with CGA-320 inlets. You can adjust the working pressure in both of your systems via a control knobs in the front. Gas Shut Off Valve for easy keg/tank swaps. Safety Pressure relieve valve/Chrome Shut Off Valve to prevent beer from backing up into the gas lines.
- EASY INSTALLATION: All you need to install this CO2 Pressure Regulator is an adjustable wrench. Each unit is supplied with 2 O-ring washers. Always place a washer between the lock-down nut and the tank to ensure a tight seal. Replace washers regularly.
- VERSATILE APPLICATIONS: Works with 15.5 Gallon Kegs, 5 Gallon Kegs, 1.75 Mini Kegs, Half Barrels and Quarter Barrel Units. Barbed Gas Outlet Fitting Allows easy connection to many gas line types.
- WARRANTY: TerraBloom 30-day money back guarantee. 1 Year Warranty Against Manufacturing Defects.
Description
TerraBloom 2 Stage CO2 Regulator is specifically designed for simultaneous use with 2 draft beer/kombucha setups (kegs or fermentation tanks). This CO2 regulator is equipped with 3 gauge displays: 1 for showing the working pressure in your 1st keg or fermentation tank, 1 for showing working pressure in your 2nd keg or fermentation tank, as well as 1 for showing the pressure in your CO2 tank. This regulator attaches to standard North American CO2 gas tanks with a male thread (standard CGA-320 connection). Red knobs on the regulator lets you adjust the working pressure without any additional tools in each individual kegs/fermentation tanks.
9. Winters PEM Series Steel Dual Scale Economical All Purpose Pressure Gauge with Brass Internals, 0-30 psi/kpa, 2" Dial Display, +/-3-2-3% Accuracy, 1/4" NPT Bottom Mount
10. Stout Beer Faucet 304 Food Grade Stainless Steel – Nitrogen Draught and Nitro Coffee Faucet by Royal Brew
Feature
- BUILT TO LAST: Engineered with 304 Food Grade Stainless Steel, this faucet is built to handle acidic beverages like coffee and draft beer. Will last longer than Brass faucets!
- GREAT TASTE: Pull forward stout design allows you to pour drinks with a super-smooth, rich body and a foamy top, perfect for your favorite draught beer or for creating a frothy iced coffee without the need of creamer, dairy, or sweeteners!
- SPECIAL DESIGN: Narrower than normal beer faucets, this design, along with a special restrictor disc, powers the beer quickly through the faucet to create a thick, creamy head. Ideal for serving Guinness, Murphy’s, Beamish and other nitrogen beers, or nitro brew coffee.
- COMPATIBILITY: Works with all standard shanks and beers towers. If you order this faucet and decide to serve traditional tap beers in the future, you can easily remove the restrictor disc inside and attach a CO2 gas setup.
- LIFETIME WARRANTY: Message us 24/7 via Amazon for full support and service!
Description
- Specifications
- Attractive, durable chrome finished, food grade stainless steel faucet
- Stout Creamer Faucet – Essential for getting the trademark lacy foam of a good Guinness or a frothy iced coffee, without the need of dairy or creamer! Dual-action pour lets you add a creamy top to your pour.
- Dimensions: 9.25″ x 2.25″ x 1″
- Weight: 1.32 lbs
- Instructions
- Faucet is not compatible with dishwasher, microwave, freezer, hot liquids, or highly acidic materials
- Note: Please do not worry if you find the faucet is dripping when you close it.
Conclusion
By our suggestions above, we hope that you can found Kit Kegerator 2 Vias for you.Please don’t forget to share your experience by comment in this post. Thank you!
