Nowadays, there are so many products of parts for simpson pressure washer in the market and you are wondering to choose a best one.You have searched for parts for simpson pressure washer in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings parts for simpson pressure washer which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
921 reviews analysed
1. RIDGE WASHER Compatible Chemical Injector Set for Pressure Washer, Replacement for Briggs and Stratton 203640GS 190593GS 190635GS
Feature
- Package: two chemical injector sets include two brass barbs with 1/8 inch-27 male BSP thread, two check valve balls, two springs and four o-rings.
- Compatible: Pressure washer soap injector kit is compatible with Briggs & Stratton Pump 190593GS, 190635GS and 203640GS. Please check the part number of your pressure washer pump and make sure the soap injector matches your pump.
- Function: If the part on your pressure washer pump is worn-out, rusted or hard-water-deposit clogged, you can replace it with this set.
- Attention: When you insert injector into receptacle of pump and tighten injector with 13mm wrench, don’t overtighten, you’ll break the o ring or crack white metal on pump.
- If you have questions, contact us at any time. We provide a service of quick reply within 10 hours. Welcome to RIDGE WASHER to see other pressure washer accessories.
Description
Feature:
compatible pump part number 190593GS, 190635GS and 203640GS.
1/8” -27 male BSP thread.
Made of brass
Package List: 2 x Brass Barbs; 2 x Check Valve Balls; 2 x Springs; 4 x O-Rings.
How to Replace
1. Follow soap hose to end and you’ll find injector. Take off soap hose.
2. Use wrench to remove old injector. Clean out any gunk or dried soap in receptacle.
3. Make sure rubber o ring is on injector as pictured. Put ball bearing inside injector and then the spring with small end of spring against the ball bearing.
4. Insert injector into receptacle and tighten injector with 13mm wrench. Don’t overtighten, you’ll break the o ring or crack white metal on pump.
5. Put the soap hose back on.
Compatible Below Pressure Washer
Troy-Bilt pressure washer:
020200-0, 020207-0, 020207-1, 020208-0, 020208-1, 020213-0, 020240-0, 020240-2, 020241-0, 020242-0, 020242-2, 020242-4, 020245-0, 020245-1, 020245-2, 020292-3, 020293-0, 020293-1, 020294-0, 020295-0, 020296-0, 020316-2, 020337-0, 020316-0, 020316-1, 020381, 01903.
2. Tool Daily Compatible Chemical Injector Set for Pressure Washer, Replacement for Briggs and Stratton 190593GS 190635GS 203640GS
Feature
- Pressure Washer Soap Injector Kit, compatible Briggs & Stratton Pump 190593GS, 190635GS and 203640GS. Please identify the part number of pressure washer pump, then check if it fits your pressure washer.
- 1/8’’ -27 male BSP thread.
- How to replace: Follow soap hose to end and you’ll find injector. Take off soap hose. Use wrench to remove old injector. Clean out any gunk or dried soap in receptacle. Make sure rubber o ring is on injector as pictured. Put ball bearing inside injector and then the spring with small end of spring against the ball bearing. Insert injector into receptacle and tighten injector with 13mm wrench. Don’t overtighten, you’ll break the o ring or crack white metal on pump. Put the soap hose back on.
- If the part on your pressure washer part is worn-out, rusted or hard-water-deposit clogged, you can replace it with this set.
- Package List: Two Chemical Injector Sets, including 2 Brass Barbs, 2 Check Valve Balls, 2 Springs, 4 O-Rings.
3. Sooprinse High Pressure Washer Gun Power Spray Gun 4000psi with 19 inch Extension Replacement Wand Lance,5 Quick Connect Nozzles for Honda Excell Troybilt, Generac, Simpson, Briggs Stratton
Feature
- ❤【Attention】Pressure washer gun is Metric M22-14mm inner connector fitting. Fit standard pressure washer hose connector.But don’t fit 3/8″ hose connector.
- ❤【Scientific Design】Gun has a comfortable grip to fit your hands, making your pressure washing job a breeze. The gun also has a safety locking trigger to prevent unwanted trigger pulls.
- ❤【Special Improvement】19″ wand with 1/4″ quick-disconnect end for simplified spray tip exchange.It provides extra length to gun to get to hard to reach places.Five color-coded spray tips with 0°, 15°, 25°, 40°, & Soap-degree spray patterns for a variety of uses,such as watering flowers and plants,washing car,washing fence,washing roof.
- ❤【Compatibility】Requires pressure washer to have 2.0GPM & Over 1000 PSI Pressure for use.Requires pressure: 70BAR – 1000PSI
- Maximun pressure: 275BAR – 4000PSI
- Maximum flow:5.3Gpm.
- ❤【Quality Assurance】Any problem,feel free to contact us.The professional team is always ready to serve you.
Description
✯Good Customer Service:✯
Any quality or use problem ,feel free to contact us. The professional service team is always here for you.
★Package Includes:
●1x Pressure spray gun
●1x Replacement Wand Lance
●5x Nozzles
★Specification:
☆Pressure spray gun
1.Length:18″
2.Requires pressure: 70BAR – 1000PSI;Maximun pressure: 275BAR – 4000PSI; Maximum flow:5.3Gpm.
3.Metric M22-14mm inner connector fitting.
☆Replacement Wand Lance
1.Length:19.68″
2.M22-14 fitting,1/4″ quick-disconnect end
3.Maximun pressure:4000PSI
☆Nozzles
1.degree:red(0°);yellow(15°);green(25°);white(40°);black(soap).
2.1/4 inch connection design
★Applicat
☆Pressure Washer gun with M22 connection, compatible with use with most of gasoline powered and electric powered pressure washers.
☆It allows you to apply soap and detergents, spray hard to reach places like crevices in sidewalks and driveways, clean stains from concrete and brick, clean painted surfaces like wood and lawn mowers, and wash windows and screens. No task is hard to tackle.
★WARNING:
DO NOT POINT AT FACE OR OTHER PERSONS, AND DO NOT USE CLOSE TO SURFACE.
4. SIMPSON Cleaning Pressure Washer Pump Guard
Description
Pump guard is perfect for storing your pressure washer for more than 30 days. It protects the pump & other components from damage caused by the cold temperatures to -25° F. Minimizes harmful corrosion by lubricating valves, seals & pistons to prevent sticking. This will ideally protect pumps Between uses.
5. M MINGLE Replacement Pressure Washer Gun with Extension Wand, M22 15mm or M22 14mm Fitting, 5 Nozzle Tips, 40 Inch, 4000 PSI
Feature
- ★Universal high pressure washer spray gun has M22 14mm or M22 15mm fitting. M22 14mm fitting is compatible with Generac, Simpson, Briggs Stratton, craftsman, karcher, Ryobi pressure washer. M22 15mm fitting is compatible with Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz, Excell power washer.
- ★If pressure washer hose has M22 14mm fitting with 14mm inside diameter, please connect to hose directly. If hose has M22 15mm fitting with 15mm inside diameter, please connect the brass coupler between gun and hose.
- ★Change the length of pressure washer gun based on your application. Easy to change pressure washer long gun to short gun. Three Length:40 inch, 25 inch, 8.8 inch. Replacement pressure washer trigger gun fits gas and electric pressure washer with M22 fitting.
- ★5 Spray Nozzle Tips: They have different spray angle (0, 15, 25, 40, 65 degree). Choose different nozzle according to your needs. Such as watering flowers and plants, washing car. Max pressure is up to 4000 PSI.
- ★Universal 1/4’’ quick connect for any accessory with 1/4’’ plug. Such as nozzles tips, pivoting coupler, foam cannon, water broom, undercarriage cleaner, surface cleaner.Comfortable handle design for easy operation. Trigger lock design for avoiding mishandling.
6. AAA Technologies Triplex Plunger Pump Kit 3800 PSI at 3.5 GPM
Feature
- 3800 psi at 3. 5 GPM
- Power boost technology
- Fully adjustable unloader system with ergonomic control
- Sight glass and advanced oil seal technology, does away with the need for a dipstick
- Thermal relief protection to prevent pump overheating
- Dual oversized radial ball bearing are installed for better wear, friction resistance and precision polished stainless Steel Pistons for extended seal life
- Crankcase is manufactured from fully anodized die cast aluminum for corrosion protection and is Sealed to prevent contamination and lube failure
Description
AAA PROFESSIONAL triplex pumps are highly efficient that minimizes engine load while delivering top performance. AAA pumps carry a 5 year limited COMMERICAL warranty. AAA pumps are equipped with our Patented Powerboost technology which provides higher pressure at the spray nozzle. AAA high pressure pumps contain dual oversized ball bearings for better wear, friction resistance and longer lasting performance in the toughest cleaning environment. AAA Pumps are equipped with the Easy-Start feature. AAA pumps are featured with solid ceramic plungers and along with top performing professional long lasting Parker high pressure seals manufactured in Germany.
5 Year limited AAA pump warranty
7. Simpson Cleaning 80151 Replacement O-Ring and Filter Kit for Cold Water Pressure Washers
8. SIMPSON Cleaning MorFlex 40224- 1/4"x 25′ 3200 PSI Cold Water Replacement/ Extension Hose
Feature
- 1/4″ x 25′ Rated up to 3200 PSI
- Lightweight polyester braid for easy handling
- High flexibility and kink resistant
- Designed to fit most gas pressure washers w/ standard threaded fittings
- 1/4″ x 25′ 3100 PSI replacement/extension hose
- MorFlexTM technology for high flexibility and kink resistance
- Equipped with M22 fittings with dual o-ring design to fit both 14mm and 15mm connections
- Includes a 14/15mm M22 hose connector
- No tools required
- Polyurethane outer jacket is non-marring and abrasion resistant
- Original hose replacement or an extension of an existing hose
- 3100 PSI Max 140°F Max
Description
MorFlex technology is used for high flexibility and kink resistance, lightweight polyester braid for easy handling. The MorFlex hose is equipped with threaded fittings with dual o-ring design to fit both 14mm and 15mm connections and includes a 14/15mm threaded hose connector. Polyurethane outer jacket is non-marring, abrasion resistant, and designed to fit most gas pressure washers with standard threaded connections. Up to 140°F maximum temperature, these are used as original hose replacement or an extension of an existing hose . 90 Day limited accessory
9. Tool Daily Thermal Release Valve for Pressure Washer Pump, 1/4 Inch NPT, 2-Pack
Feature
- Fitting: 1/4″ NPT. The outside diameter of male thread is 0.54 inch. Include 2 pieces pressure washer release valve.
- Compatible with many brands, such as Generac,Homelite, Karcher, Briggs, Power Stroke, Husky, Black Max, Craftsman, Him Ore and Ridged pressure washers. Replaces Homelite part numbers 678169004, 678169002 and 678169001. Replaces Briggs and Stratton parts 208673GS, 21783GS, 194298GS and B3090GS.
- Thermal Relief Valve protects pressure washer pumps operating in a safe temperature range to prevent overheating. When water temperature reaches above 145º F, pump seals may fail. The thermal relief valve will open to release hot water and allow cold water to enter the pump. So it continues to operate at a safe temperature. If the pump have ever overheated, the thermal relief valve must be replaced.
- Made of brass. Max. inlet pressure of pumps is 200 PSI.
- Quick reply within 10 hours. Any issue or question, please free to contact with us.
Conclusion
By our suggestions above, we hope that you can found Parts For Simpson Pressure Washer for you.Please don’t forget to share your experience by comment in this post. Thank you!