Finding your suitable readers for tool box lift support is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for tool box lift support including detail information and customer reviews. Let’s find out which is your favorite one.
554 reviews analysed
1. Apexstone 200N/45LB 10 inch Gas Struts,Gas Springs,Gas Strut,Lift Support,Gas Shocks,Lid Stay,Lid Support,Set of 2
2. Suspa C16-03795 C1603795 12" Gas Prop, Quantity (2), Force is 24 Lbs Per Prop and Force Per Set is 48 Lbs, Camper Rear Window, Tonneau Cover Lift Supports, Window Lift Support, Struts, Made in USA
Description
Gas Charged Lift Supports are energy storage devices which create force by compressing gas inside a cylinder. Unless shown as a universal, each Lift support listed in this Amazon item is specifically manufactured to OEM specifications for the listed application. Each support is tested to perform as well as the original units and in many cases to exceed the manufacturers specification. Lift Supports lose pressure over time, even sitting on shelves in most auto parts stores and many of the inventory liquidators on the web. *Please Note* If your existing part number does not exactly match this part number internal components could be different.
3. 2 Truck Upfitters 12" Gas Props (12.2" ext, 7.5" comp, 40 lbs ea) for ARE Snugtop Leer Camper doors & ALUMINUM Weatherguard Toolboxes. MEASUREMENT REQ’D! Incl 4 ball mounts!
Feature
- CHECK YOUR LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL TOPS AND TOOLBOXES! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE!
- Truck Upfitters Pair (2 total) of 40 pound (each) gas struts. 12.2″ extended length and 7.5″ compressed length. Most commonly used for camper shell side windows (windoors) or toolboxes.
- These do not fit all toolbox / camper shell brands and models. Measure your strut from center of socket to center of socket when fully opened and fully closed to get accurate measurement.
- Come with four threaded 10mm ball mounts and nuts for alternate ‘other than camper shell’ applications. Equivalent to Suspa #C16-11028, Stabilus #19068, or Weatherguard 7009-2PK . Prime! Free Shipping! In Stock!
- NOT FOR STEEL TOOLBOXES, WILL NOT HOLD UP LID. Fit most Weatherguard ALUMINUM ONLY truck bed toolboxes, models 121-0-01, 121-5-01, 123-0-01, 123-5-01, 127-0-01, 127-5-01, 131-0-01, 131-5-01, 137-0-01, 137-5-01, 147-0-01, 147-5-01, 154-0-01, 154-5-01
Description
Truck Upfitters Premium Gas Struts for Camper Shell Side Doors/Windoors. Fits ARE, Snuptop, Leer, ATC, and Century brands, along with many others. Also fit Weatherguard Toolboxes! These do not fit every toolbox or camper shell brand and model door. Please measure your struts before replacing with these. These are 40 lb struts, so they are for medium weight aluminum-framed or solid glass rear / side doors and Aluminum toolbox lids. Please check out our other sizes and pressures of gas struts by searching for Truck Upfitters.
4. Dee Zee DZTBSHOCK1 Tool Box Replacement Shock
Description
Dee Zee Tool Box Accessories – Replacement Shock. A replacement for shock Dee Zee tool boxes. A 10. 5 inch long, with an 80 pound lift weight. Dampened for controlled expansion. Ball and socket style mount with 10mm sockets.
5. Per Shock 35-Lbs (156N) Universal Lift-Supports Struts, 10mm Ball-Socket Shocks Gas Springs Extended Length 10 Inches Vepagoo, Set of 2
Feature
- ????????Universal Lift Support???????? – Extended Length: 10.00 Inches (254mm), Compressed Length: 6.6 Inches (168mm), Force: 156N/35 Lbs Per Shock.
- ????????10 inches 35 lb Gas Shocks???????? -Vepagoo Gas Shock perfectly fit for RV door/cabinet/bed, Camper roof hatch, Pickup toolbox, truck bed toolbox cover or bed, and other DIY applications, Household cabinets.
- ????????2 Pieces Gas Charged Shocks???????? – Shaft End Fitting: Ball Socket U Band (Nylon)=10mm=3/8″=.39″
- Body End Fitting: Ball Socket U Band (Nylon)=10mm=3/8″=.39″
- ????????Intercharge Part No.???????? – 4058,4058,8195695,012170,7835PB,40231035,40231540,SL10-35,ML10-35,SL-1035,SL-10-35,ML-10-35,SL10-35-1,SL-10351,SL-10-35-1,SL10-35-5,SL-10355,SL-10-35-5,SL30-35,ML30-35,SL-3035,ML-30-35,SL-30-35,SL30-35-1,SL-30351,SL-30-35-1,SL30-35-5,SL-30355,SL-30-35-5,SL1035,SL10351,SL10355,ML1035,SL3035,SL30351,SL30355,ML3035,RB8795961,95961
- ????Customer Service???? – Lifetime “FREE REPLACEMENT/REFUND” Warranty for normal damage, any questions you can Click “Ask Seller” beside your order for assistance!
6. 2 Truck Upfitters 10.5" Gas Props (10.5" extended, 6.7" comp, 25 lbs of press ea) for SLIMLINE/NARROW UWS DeeZee etc Aluminum Toolboxes & Camper Shell Windoors. MEASUREMENT REQ’D! Incl 4 ball mounts!
Feature
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL TOOLBOXES OR CAMPER SHELLS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE!
- Truck Upfitters Pair of 25 pound (each) gas struts. 10.5″ extended length and 6.7″ compressed length
- These are for NARROW / SLIMLINE toolboxes, but do not fit all toolbox or camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened and fully closed to get accurate measurement.
- Comes with four 10mm ball mounts for alternate ‘other than camper shell’ applications.
- Equivalent to OEM # 232076 & 201237 Prime! Free Shipping! In Stock!
Description
Truck Upfitters Premium Gas Struts for SLIMLINE / NARROW standard duty aluminum toolboxes, such as those by Better Built, UWS, DeeZee, Husky, and other similar brands. NOT FOR STEEL OR HEAVY DUTY ALUMINUM OR ANY FULLSIZE TOOLBOXES. Also fits Camper Shell Rear and side doors for brands such as ARE, Snuptop, Leer, ATC, and Century brands, along with many others. These do not fit every toolbox and camper shell. Please measure your struts before replacing with these. These are 25 lb struts each, so they are only for light weight side camper shell doors or standard & light duty NARROW (11-13″ wide lids) aluminum toolboxes. Not for full width boxes, but we do have other sizes for those boxes, Please check out our other sizes and pressures of gas struts by searching for Truck Upfitters. PLEASE MEASURE YOURS FIRST before ordering.
7. 2 Truck Upfitters 10" Gas Props (10" extended, 6.7" compressed, 40 lbs of press ea) for Standard Aluminum UWS DeeZee etc Toolboxes & Camper Shell Side Windoors. MEASUREMENT REQ’D! Incl 4 ball mounts!
Feature
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL TOOLBOXES OR CAMPER SHELLS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE!
- Truck Upfitters Pair of 40 pound (each) gas struts. 10″ extended length and 6.7″ compressed length
- These do not fit all toolbox or camper shell brands / models. NOT FOR STEEL OR HEAVY DUTY ALUMINUM TOOLBOXES! Measure your strut from center of socket to center of socket when fully opened and fully closed to get accurate measurement.
- Comes with four 10mm ball mounts for alternate ‘other than camper shell’ applications.
- Equivalent to Suspa # c16-09322. Prime! Free Shipping! In Stock!
Description
Truck Upfitters Premium Gas Struts for fullsize standard duty aluminum toolboxes, such as Better Built, UWS, DeeZee, Husky, and other similar brands. NOT FOR STEEL OR HEAVY DUTY ALUMINUM TOOLBOXES. Also fits Camper Shell Rear and side doors for brands such as ARE, Snuptop, Leer, ATC, and Century brands, along with many others. These do not fit every toolbox and camper shell. Please measure your struts before replacing with these. These are 40 lb struts each, so they are typically for medium weight side camper shell doors or standard & light duty fullsize (16-20″ wide lids) aluminum toolboxes. We do have other sizes for those boxes, Please check out our other sizes and pressures of gas struts by searching for Truck Upfitters. PLEASE MEASURE YOURS FIRST before ordering.
8. Dayincar Universal Gas Charged Lift Supports Shocks Struts Springs Compressed Length 6.75 inches Extended Length 10 inches 60lbs Force SG459003 Set of 2
Feature
- Extended Length 10 inches.Compressed Length 6.75 inches.
- Force (lbs) 60.00, ext.ser.num 267N
- Blade|Eyelet Mount.Eyelet ends 10.2mm.
- Uses include Tool box,Truck work box,Household cabinets,Automotive,Industrial,Marine and many other applications
- Please see the item detail carefully before you purchasing.
Description
Extended Length:10.00″
Compressed Length:6.75″ Force (lbs) 60.00
ext.ser.num 267N
9. Dayincar Qty(2) 4672 Extended Length 10 Inches Compressed Length 6.75 Inches Froce 51 Lbs Universal Lift Supports Struts Shocks Dampers Springs Props
Feature
- Extended Length [In]: 10.00
- Compressed Length [In]: 6.75
- Force (lbs) 51.00, ext.ser.num 227N
- Blade|Eyelet Mount.Eyelet ends 10.2mm
- Interchange Part Number: 4672,8196142,1713EO,1007945,1007945,1713,10079,1007943,1007850,1007850,1713EO,18915,FRS40,FSR40,SL1-50,ML1-50,SL- 150,ML-1-50,SL-1-50,SL1-50-1,SL-1501,SL-1-50-1,SL1-50-5,SL-1505,SL-1-50-5,SL150,SL1501,SL1505,ML150,RB8795791,95791
- Easy to install in just minutes – no special tools required. And please check the below description and compatibility chart before your purchasing.
Description
Extended Length: 10.00 inches
Compressed Length: 6.75 inches Force (lbs) 51.00, ext.ser.num 227N
Blade|Eyelet Mount.Eyelet ends 10.2mm=13/32″=.402″
Perfect fits Tool box,Truck work box,Household cabinets,Automotive,Industrial,Marine and many other applications.
10. 2 Pack 10 inch Gas Prop Force 100N/22LB Gas Struts – Black Gas Springs/Window Lift and Lid Support/Gas Shocks for RV Bed Platform/Floor Hatch/Outdoor Bench/Cabinet/Tool Box/Truck Canopy/Camper Shell C
Feature
- ★Stable Support: Lids soft open gently, angle up to 100 degrees. NOT SOFT CLOSE
- ★Force:100N/22lbs(Per Strut), Length (From hole center to the other): 9-11/16 ”, travel: 3-14/25 ”, distance between ball mounts compressed
- 6-1/8”
- ★Available working temperature :-11℃~50℃/12℉-122℉, Up to 50,000 times of factory inspections, 1-Year Warranty
- ★Manufacturer-Direct Sales: High quality, Reasonable price
- ★PLEASE READ: Before clicking “Add to Cart” be sure that it says “Sold by NIDAYE(Fabcell) and Fulfilled by Amazon”. NIDAYE(Fabcell)’s manufacturer warranty is ONLY EXCLUSIVE to sales made through NIDAYE(Fabcell) Products. Any purchases made through unauthorized sellers would not be warranted. if our product did not work well, please contact us for exchange or refund
Conclusion
By our suggestions above, we hope that you can found Tool Box Lift Support for you.Please don’t forget to share your experience by comment in this post. Thank you!