Nowadays, there are so many products of bosch safety table saw in the market and you are wondering to choose a best one.You have searched for bosch safety table saw in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings bosch safety table saw which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
942 reviews analysed
1. Bosch Model 4000 & 4100 Series Table Saw Zero-Clearance Blade Insert 4130
Feature
- Insert Dimensions: Fits 4100/4000 series jobsite table saws 13-9/16″ x 3-3/4″ x 7/16″
- Made from high-density phenolic laminate with a bonded-melamine surface
- Bosch insert insert fits various Bosch models of table saws.
- Includes leveling screws, side and end adjustment screws
- rear safety tab
- pre-cut blade bottom pocket
- Please check your Length x Width x Thickness of your current insert before ordering to ensure that you get the correct insert.
Description
Replace your factory table saw insert with a phenolic zero clearance insert. Zero Clearance inserts help prevent kickback and tear-out on your stock pieces when feeding through a table saw blade. By raising your blade up through the insert, you eliminate gaps between the side of the insert and the blade. This provides with much better stock support than with most factory inserts that come with the saw. This also prevents smaller stock pieces from falling into the opening that exists with factory inserts. Zero clearance inserts can be used with any type of standard saw blade (standard or thin kerf blades) and can also be used with dado blades. It is recommended that if you need an insert to accommodate both a standard saw blade and a dado blade, that you purchase two separate zero clearance inserts. Use one for your normal cuts and one for dado cuts. Insert color surfaces may vary depending on availability.
2. MJ SPLITTER Table Saw Safety Splitter and Riving Knife Alternative for Zero Clearance Insert
Feature
- Popular aftermarket table saw splitter for preventing kickback on table saws (for Thin Kerf Saw Blades Only)
- Voted Best Tool by Popular Woodworking (2004) for Table Saw Safety!
- Installs directly to wood or plastic Zero Clearance Inserts (Throatplates)
- Mini-featherboard technology keeps the workpiece against the fence and prevents burning
- Simple instructions and installation drill guide included
Description
The MJ SPLITTER system is a low profile splitter that is simple to install, and obtains effective results by keeping stock burn free, and reduces kick back as well as providing a mini feather board effect. MJ SPLITTER is designed to be installed into a zero-clearance insert, and the MJ SPLITTER comes with installation guide, drill guide and drill bit for installation. Each package comes with two MJ SPLITTERs. The Thin Kerf Splitter (YELLOW COLORED) is designed for kerf ranges: 0.090″ to 0.118″. Always use the correct MJ SPLIITER corresponding to your saw blade. Packages do not include zero-clearance inserts. Only use for 90 degree cuts. Made in the USA.
3. POWERTEC 71009Safety Push Block and Stick Package, 5-Piece
Feature
- Essential safety protection to use router table, shaper, band saw, table saw and jointer
- 1 long push block, 2 short push blocks, 1 safe V stick and 1 push stick
- total of 5 pieces
- Tough, durable plastic design for long lasting use
- Rubber soles firmly grip your workpiece
- Orange color ensures high visibility
- Prevents kickback and protects hands and fingers from sharp cutting blades
Description
The POWERTEC 5-Piece Safety Package provides the key components to ensure the safety and protection of professional and hobby woodworkers alike. Set includes: 1 long push block, 2 short push blocks, 1 safe V stick and 1 push stick. Ergonomic handle-design offers comfortable, steady and firm grip. The rubber soles of these accessories securely hold your work pieces, as you guide them into the cutting blades. Keep your hands and fingers safe – and prevent kickbacks! – with this essential set. You’ll have exactly what you need to get the job done – safely, effectively, and easily!
4. Fulton Dual Deluxe Stackable Featherboards with Riser Blocks Aluminum Miter Lock Bar and T Bolt Hardware for Track or Miter Slot Mounting Ideal for Table Saws Router Tables and Band Saws
Feature
- What is a featherboard you might ask? Is it something I need for my workshop? Well the short answer is yes. Anyone who has a table saw or router table should seriously consider having at least one. Most work shops have more than one handy at any given time. Featherboards are simple devices that help keep your stock up against the fence your running your stock on. They generally act like a third hand by helping you control your stock while you push your stock through.
- The Fulton Dual Deluxe Stacked Featherboard can be used as one unit or can be separated and used for vertical and horizontal applications. When the featherboards are stacked with the included 2” tall spacers, you’ll have a full 3-7/8” worth of holding pressure height. This means you can hold taller stock for re-sawing projects on table saws and band saws! When using the featherboards separately, one can be installed into a miter slot and the other can be installed into a track on a fence.
- Many featherboards come with a miter bar locking system that typically do not fit very well. We identified this issue and have redesigned the miter bar making it far more secure and easier to lock into your miter track. The aluminum bar is longer than older designs and is a bit more narrow in the center. This means that when the knob is secured and the bolt is properly seated, the bar spreads out much better than before and creates a nice tight fit into your miter track.
- This dual featherboard also includes 1½” long ¼” x 20tpi t-bolts. This gives you the option to mount the featherboards into small t-track slots. These t-track slots are most commonly used on router table tops and router table fences. This means you can use the featherboard vertically on a router table fence or horizontally laying flat on a router table or table saw top surface.
- The dual featherboard comes with all the necessary hardware to get going right out of the box. Each featherboard measures approximately 7¾” tall by 7-1/8” wide which is ideal for most workshop fences and table saw tops. Please keep in mind that some job site table saws and router tables have a short distances from the end of the table to the cutter or blade. The featherboard must be completely inside the track or slot in order for it to properly work.
5. Bosch TS1016 Outfeed Support Assembly
Description
Bosch TS1016 extends 18-Inch and stores flush to table. It extends the working depth of Bosch 4000, 4100, GTS1041A 10-inch table saw. It features hardened metal construction; aluminum mounts and includes table saw extension. The table saw is not included.
6. POWERTEC 71029 Magnetic Push Stick
Description
The POWERTEC Magnetic Push Stick maximizes woodworking safety and control, as you guide your stock through the cutting blades. Keeps your hands and fingers safe and prevents kickbacks, thus ensuring the safety and protection of professional and hobby woodworkers alike. Featuring an ergonomic and effective handle-design that provides a comfortable and steady grip throughout the cutting process, allowing the user to exert precision lateral and vertical force. Provides optimum maneuverability when working with smaller workpieces. Store the push stick directly onto the cast-iron worktable, utilizing the convenient two built-in handle magnets, thus always keeping this handy tool within arms length. This convenient accessory measures 11-1/2-Inches in length ensuring maximum versatility, and can be used with a multitude of machines such as shapers, jointers, table saws, etc.
7. O’skool 18 Inch Miter Gauge Fence system
Feature
- 18″ long bar fits any standard 3/4″ x 3/8″ track ot T-slot.
- 18″ long aluminium fence complete with flip-up length stop.
- Four sprung loaded ball bearings keep the bar snug in the track
- the fence runs true without side-play.
- Clear easily read scale for setting any intermediate angle.
- Features positive stops at 0°, 22.5°, 30°, 45°, 60°, 67.5° and 90°.
Description
p>The fence improves safety and accuracy when cutting or sanding and makes it easy to cut perfect mitres quickly.
The solid steel protractor head features positive stops at 0°, 22.5°, 30°, 45°, 60°, 67.5° and 90°, both left and right. 13 pre-set common angles in total.
The bar is 18″ long with a removable locking washer making it usable with any standard 19 x 9.5mm (3/4″ x 3/8″) track or similar sized T-slot.
Four sprung loaded ball bearings keep the bar snug in the track; the fence runs true without side-play.
8. 4 Piece Woodworking Safety Kit w/Feather Board | Magnetic Handle Push Stick | Straight Handle Push Block and Angled Handle Push Block | Ideal for Table Saws | Router Tables | Jointers and Band Saws
Feature
- Keeping your fingers and hands away from sharp cutters and blades in your workshop should be priority number one for any woodworker. Thats why we have created this one of a kind safety kit!
- This 4 piece safety kit is designed to be your essential safety protection to help from getting to close to the cutters or blades on a router table, shaper, band saw, table saw and jointer. From the narrow, magnetic push stick, to the versatile feather board, this kit has all the bases covered in regards to many different woodworking applications.
- The general idea behind these safety devices is to help you guide and control your stock when feeding through a table saw, band saw, jointer or a router table. The push blocks are generally used on jointers and some router applications, while the push stick is primarily used on table saw projects. The feather board can be mounted multiple ways and works on router tables, shaper tables and table saws.
- The feather board can be used on a table saw, router table or even a router fence You can secure the feather board into standard 3/4” wide by 3/8” deep miter slots using the innovative expanding miter bars. The feather board can also be secured using the supplied t-bolts. The t-bolts can secure the feather board to 1/4” t-track slots like those found on some router tabletops and router table fences.
- Soft, receptive, rubber foam pads line the bases of the two push blocks. The rubber soles make pushing and controlling your stock much easier and safer then when doing it by hand. The soles are also washable with with warm water. Must let the rubber soles dry for 24 hours prior to using them again.
- The magnetic handle push stick is perfect for pushing stock through on a table saw. It works exceptionally well when used in conjunction with the feather board. The 4 Piece Woodworking Safety Kit includes: 1 each multi-mount feather board, 1 each magnetic handle push stick, 1 each straight handle push block and 1 each angled handle push block.
9. POWERTEC 71393 Dual Universal Featherboards for Multi-Functional Woodworking w/Flex and Miter Lock System – 2 Pack (Double Stack Edition)
Feature
- FUNCTION: Provides optimal feed control and holding action for your stock with minimal kickback to provide you with high precision cuts
- FEATURES: This kit possesses additional hardware for adaptive mounting solutions, including miter slot brackets for horizontal mounting, vertical mounting for 3” multi-tracks and plastic spacers for stackable featherboards
- VERSATILE: This feather board contains a miter lock system (plus a reversible profile) that is compatible with both, t-slots and miter slots for table saws, band saws and router tables
- PREMIUM DESIGN: Manufactured in color-alert orange, these featherboards are quick and easy to adjust and are molded out of high quality plastic designed to give you functional flexibility and long term usage
Description
Introducing the Dual Universal Featherboards by POWERTEC.
Whether using a tablesaw, band saw or router table, these feather boards are designed to provide you with just enough pressure to help you mount (secure) your wood & work stock for high precision cuts with minimal kickback. Ultimately, they allow for a safer and more efficient workflow for the professional or DIY enthusiast. These must-have accessories are perfect for both, a miter slot or t-slot, and simply open up your project flexibility being able to utilize your go-to woodworking tools through versatile mounting solutions.
Our Universal Featherboards are made out of premium plastic material that give you highly flexible profiles and durability for long-term usage. The kit includes 4 ergonomically designed and easy-to-adjust knobs for comfort and convenience.
Features
- Miter Lock System works with any t-slotted or standard miter slot (3/4” x 3/8”) – offering you versatility for an assortment of applications.
- Includes additional mounting hardware for both vertical and horizontal mounting – allowing you to work with any number of table saws, band saws and router tables.
- Contains spacers and longer screws that pair both featherboards – used to create elevation and double stacking.
- Comes with everything you need to safely mount your stock – for seamless integration.
Kit Contains
(2) Featherboards
(4) 5 Star Threaded Lock Knobs
(4) Miter Slot Brackets
(4) 2” Special Screws (5/16”-18 TPI)
(2) 3” Stacking Screws
(4) 2-1/2” T-Slot Tee Bolts (5/16”-18 TPI)
(4) Flat Washers
(4) Plastic Spacers 1/2” dia by 3/8” height
Conclusion
By our suggestions above, we hope that you can found Bosch Safety Table Saw for you.Please don’t forget to share your experience by comment in this post. Thank you!
