Finding your suitable readers for brass push lock fittings is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for brass push lock fittings including detail information and customer reviews. Let’s find out which is your favorite one.
624 reviews analysed
1. Metalwork Plastic & Nickel Plated Brass Push to Connect L Shaped 90 Degree Elbow Male Fitting, 3/8" OD x 1/4" NPT Male (Pack of 5)
Description
Fluid Type: Air
Operating Pressure: 0- 150 PSI / 0 – 9.9 kgf / cm2 (0-990kPa)
Working Temperature: 32-140°F / 0-60°C
Metallic Body: Nickel-plated Brass
O-Ring: NBR (Acrylonitrile butadiene rubber)
Plastic Body: PBT (Polybutylene terephthalate)
Packing: NBR (Acrylonitrile butadiene rubber)
Back Ring: POM (Polyoxymethylene plastic)
Lock Claws: Stainless Steel
Collar: Zinc Alloy
Sleeve: POM (Polyoxymethylene plastic)
2. Utah Pneumatic Push To Connect Fittings Nickel-Plated Brass Pc Male Straight 1/4"Od 1/8"Npt Thread Straight Connect Push Fit Fittings Tube Fittings Pneumatic Fittings 5 Pack (1/4od1/8npt Brass) 5 pack
Feature
- SPECIFICATION: Acceptable Fluid : air and water Pressure Range: Max Working Pressure: 2MPa | 290psi/ Working Temperature:-20°C—120°C | -4°F—248°F Applicable Tube: PU/NYLON/Soft PE hose push connect air fittings
- Installation : push to connect fittings can be done within a short period of time. This tube connector is available in various styles and models Each model to serve its purpose All models of push in connector are designed to suit your pneumatic piping needs perfectly
- Thinking of changing the tube direction after installation ? .Be relaxed . You can easily change the tubing connector direction even after installation. The release ring conforms with the ellipse design to ensure that the disconnecting unit is in good shape
- It’s important to note the taper threads on each fitting are properly coated with Teflon for optimal performance of the entire plumbing system.All push to fit, contains internal hexagonal holes
- this enhances the installation of the push connect fittings process in a narrow space
- These Push In Fittings Meet The Pressures And Temperatures Mentioned. Our Brass fittings for plastic tube Is More Resistant To High Temperatures We Are Ready To Serve You And Answer Any Questions Related To Our Connect It Fittings We Are Committed To Quality Of Our push to lock And If For Some Reason You Will Not Be Satisfied With Our Quick Connect Hose Fittings Money Back Guaranteed
3. Beduan Pneumatic BPC Nickel-Plated Brass Push to Connect Air Fitting, 1/2" Tube OD x 1/4" NPT Male Thread Straight Push Lock Fitting (Pack of 2)
Feature
- Body Style: Male Straight / Size:1/2 “OD x 1/4” NPT Straight Union Connector
- Fluid Type:Air Vacuum,water,oil (no freezing)
- Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC
- Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR
- Body:Nickel-Plated Brass.
- Working Temperature:0-60°C | 32~140°F ;Negative Pressure:-100Kpa | -29.5 In Hg
Description
Beduan Pneumatic Fittings are a compact one piece push-to-connect fitting.
All items in the Beduan Pneumatic composite range are silicone free.
The Nickel-Plated Brass gripping ring ensures excellent tube retention while the D seal
within the fitting provides a positive seal on the O.D. of the tube,
in both static and dynamic positions, due to an optimized design of the fitting cavity.
Beduan Pneumatic composite should not be used for live swivel applications
Body and collar are made of Nickel-Plated Brass, gripping ring is stainless steel, and D seal and O-rings are Nitrile.
4. Beduan Brass BPL Push to Connect Air Fittings Elbow 1/4" Tube OD x 1/8" NPT Male 90° Degree Adapter (Pack of 5)
Feature
- Type:Push in fitting/Push to connect /Size:1/4 ” Tube OD x 1/8″ NPT Thread
- Fluid Admitted:Air Vacuum Water (no freezing)
- Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC
- Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR/ Lock Claw:Nickle-Plated Brass /Body:Nickle-Plated Brass
- Working Temperature:0-60°C | 32~140°F/Negative Pressure:-100Kpa | -29.5 In Hg
5. Beduan BPL Push to Connect Air Fittings Male Elbow 6mm Tube OD x 1/8" NPT Thread (Pack of 10)
Feature
- Body Style: Male Elbow
- Size:6mm
- Fluid Type:Air Vacuum (no freezing)
- Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC
- Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR
- Lock Claw:Stainless Steel(SUS)
- Body:Plastic(PET)
- Working Temperature:0-60°C | 32~140°F ;Negative Pressure:-100Kpa | -29.5 In Hg
Description
Beduan Pneumatic Fittings are a compact one piece push-to-connect fitting.
All items in the Beduan Pneumatic composite range are silicone free.
The Stainless steel gripping ring ensures excellent tube retention while the D seal
within the fitting provides a positive seal on the O.D. of the tube,
in both static and dynamic positions, due to an optimized design of the fitting cavity.
Beduan Pneumatic composite should not be used for live swivel applications
Body and collar are made of Nylon 6.6, gripping ring is stainless steel, and D seal and O-rings are Nitrile.
6. 1/4“od Push to Connect Fittings Pneumatic Fittings kit 2 Spliters+2 Elbows+2 tee+2 Straight 8pack (1/4" Combo)
Feature
- utah pneumatic: push to connect air and water Pressure Range: 0-1 Mpa145 psi Max pressure:1.5 Mpa/ 217 psi/15 bar Temperature Range 0-60°C | 32~140°F Applicable Tube: PU/NYLON/Soft PE hose fitting
- Easy to install This tube connector is available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly
- You can easily change the tubing connector direction even after installation. The release ring of conforms with the ellipse design to ensure that the disconnecting of connect push is in good shape
- All push to lock contains internal hexagonal holes this enhances the installation process in a narrow space.push connect fittings Can be dismantled and assembled easily These Push In Fittings Meet The Pressures And Temperatures Mentioned
- At Extreme Temperatures In Places Close To Heat Sources we Would Recommend Our Connect Push Brass Which Is More Resistant To High Temperatures We Are Ready To Answer Any Questions Related To Our Connect It Fittings
Description
User’s Guide
1. Except air and water,don’t attempt to use the fittings on other fluids
2. The tube fitting is prohibited where spark and fire might be occurred
3. The tube fitting is prohibited if water temperature is above 60’C
4. Never apply tube joint with additional external load(bending,twist or
pulling),otherwise damage or leakage will be occurred.
Caution
Check the end of tubing for a right angle cutting and check the external surface of
tubing for any damage or scratch.Please refer to following instruction in connection
of tubing.When you insert the air tubing into the joint,you will have two-step
feeling.Section one is locking claw and section two is sealing ring.Must insert tube
into section two.
Sleeve is used in tubing connection and disconnection.The sleeve is designed as an
oval shape,which is covienient in assembly and disassembly.However,round sleeve is
available to met any special demand the product has limited space for oval
sleeve.After connection of tube joint and tubing,always try to pull tubing and ensure
its firm connection.
Always use proper tool to tighten external hexagonal and internal hexagonal parts of
the tube fitting.Always apply recommended torque on screws otherwise extra torque
might damage thread and cause air leakage while insufficient torque might cause
loose screws and air leakage.
After Screws are tightened,you may adjust the direction of tubing with most of our
tube joint.If it is hard in adjustment,you may apply recommended torque to turn
screw to adjust direction of tubing.
7. BestTong Nickel-Plated Brass Push to Connect air Fittings Metric 6MM OD Straight Union Connect air Fittings Quick Connect Push Lock Fittings air Bag Fittings Pneumatic Fittings Tube connectors 6 Pack
Feature
- Fluid Admitted: Air, Water, Steam
- Max Working Pressure: 2.0MPa | 290psi
- Applicable: Pipe PU/PA/FEP/PFA
- Working Temperature:-20°C—120°C | -4°F—248°F
- Body: Nickel Plated Brass/Seal: O-ring FKM(Viton)
- EASY INSTALLATION: can be done within a short period of time. This tube connector is available in various styles and models Each model to serve its purpose All models are designed to suit your pneumatic piping needs perfectly
- EASY CHANGING: You can easily change the tubing connector direction even after installation, The release ring conforms with the ellipse design to ensure that the disconnecting unit is in good shape
- PLEASE NOTE: The taper threads on each fitting should be properly coated with Teflon for optimal performance of the entire plumbing system.All fittings, however, contains internal hexagonal holes
- this enhances the installation process in a narrow space
- Quality Performance: All Connect Push Brass Air Fittings Are More Resistant To High Temperature, with good sealing performance, high pressure resistant and non tripping
Description
Feature:
①. The tube connectors are primarily made for air and water . Other fluid types are prohibited; ②. The use of pneumatic connector is limited to areas that are highly prone to fire outrage; ③. Don’t use the connections in areas whose water temperature is above 120’C; ④. To avoid leakages and damage,you’re advised to resist the temptation of adding extra loads to the push connectors
2. You can easily change the tubing connector direction. Narrow space is also suitable with the push
3. Push Fittings are mainly used for quick connector piping, which can achieve line connected or disconnected without other tools easily
4. Widely used in industries automatic production equipment like machinery, electronics, automobile, packaging and medical
Specifications:
Material: Nickel Plated Brass
Brass Push Fluid Type: Air, Vacuum
Working Pressure: 0-2.0 MPa| 0-290 Psi
Working Temperature: -20-120°C| -4~248°F
Applicable Tube: Pipe PU/PA/FEP/PFA
Package Included:
6 x Push to Connect Fittings
8. Hamineler 12 PCS Straight Push Quick Release Connectors, Push to Connect Tube Fitting Tube Quick Connect Fittings 1/8in NPT Thread 1/4in Tube OD
Description
Package includes:
6 PCS Male Elbow Quick Release Connectors
6 PCS Male Straight Quick Release Connectors
9. 40 Pieces Straight Push Connectors, 6/8 /10/12 mm Quick Release Pneumatic Connectors Air Line Fittings for 1/4 5/16 3/8 1/2 Tube (2 Way)
Feature
- Material – Made of quality PU & Plastic. High pressure resistance, can withstand strong pressure without tripping out. Great for long term use. Push to connect fittings type: 1/4”, 5/16”, 3/8”,1/2’, fit for 6mm 8mm 10mm 12mm OD tube
- Easy to use: Simple push in design for connecting to the tube and provide secure connection, requires no extra sealing.
- Convenience: Quick Connect Fittings easy to install, flexible and space-saving, 360-degree rotate, Release rings adopt ellipse design, which can be removed conveniently. No extra sealing needed, just need a simple push, provide secure connection.
- Application: It is widely applied in industries automatic production equipment like machinery, electronics, automobile, packaging
- Quantity: package includes 40 pieces fittings, 10pcs for 1/4″ fittings, 10pcs for 5/16″ fittings, 10pcs for 3/8″ fittings, 10pcs for 1/2″ fittings, meet your requirement for various purposes
Description
Features:
Simple push in design for connecting to the tube and provide secure connection, requires no extra sealing. Round release ring on two ends facilitates pneumatic installations in confined spaces. High pressure resistance, no tripping, can withstand greater and stronger pressure without tripping, easy installation, long service life. The release ring adopts elliptic design, and the disassembly is more convenient and save labor with good sealing performance. This product contains 40 pieces fittings, 10 pieces 1/4 inch fittings, 10 pieces 5/16 inch fittings, 10 pieces 3/8 inch fittings, 10 pieces 1/2 inch fittings.
Specifications:
Material: PU and Plastic
Fluid: air
Normal Pressure Range: 0-0.9Mpa
Maximum Pressure: 1.32Mpa
Low Pressure Range: -99.9~0Kpa
Temperature: 0 to 60°C
Fits for Tube OD: 1/4 inch (6mm), 5/16 inch (8mm), 3/8 inch (10mm), 1/2 inch (12mm)
Package Included:
40 x Straight Push Connector
Conclusion
By our suggestions above, we hope that you can found Brass Push Lock Fittings for you.Please don’t forget to share your experience by comment in this post. Thank you!