We spent many hours on research to finding dryer gas line connection adapter, reading product features, product specifications for this guide. For those of you who wish to the best dryer gas line connection adapter, you should not miss this article. dryer gas line connection adapter coming in a variety of types but also different price range. The following is the top 9 dryer gas line connection adapter by our suggestions
813 reviews analysed
1. Mr. Heater One-Stop Universal Gas-Appliance Hook-Up Kit
Feature
- Nullify
- Imported
- 5-piece universal gas-appliance hook-up kit
- Comes with everything needed for installing most gas appliances
- Includes 18-inch flexible gas line, 3 different couplings and on/off valve
- On/off valve provides easy servicing of appliances or summer shutdown
- Solid brass fittings. One Stop Universal Gas Appliance Hook Up Kit has everything needed for installation and can be used with gas logs, unvented wall mount heaters, gas stoves, and garage heaters
Description
Perfect for gas logs, garage heaters, gas stoves and wall mounted heaters. Size: 3/8 inch, Compatible With: Heaters, logs, ranges, dryers, etc., Product Type: Connection kits, Fuel Type: Propane/natural gas
2. Stanbroil One Stop Gas Appliance Hook Up Kit – Brass Gas Ball Valve and Flexible Gas Connector w/Fittings
Feature
- Highly durable, easy to install and use for most gas appliances
- 1/2″ OD x 3/8″ ID, 22″ stainless steel flexible gas connector with 1/2″ Female Flare on both end
- Brass Shut-off valve 1/2 female NPT x 1/2 Male Flare
- 3 different couplings,1/2″ male Flare x 1/2″ NPT, 1/2″ male flare x 3/8″ male NPT, 1/2″ male flare x 3/8″ female NPT
- CSA certified
Description
Along with everything needed for installing most gas appliances
On/off valve provides easy servicing of appliances or summer shutdown
5 Pieces kit includes: 22″ stainless flexible gas connector
1/2″female flare at both ends
1/2″ male Flare x 1/2″ NPT
1/2″ male flare x 3/8″ male NPT
1/2″ male flare x 3/8″ female NPT
Brass shut-off valve with 1/2″ female NPT x 1/2″ male flare
Fit for gas logs, garage heaters, gas stoves and wall mounted heaters
3. Dormont 0240892 Gas ApplianceConnectorKit 48 In. Long 5/8 In. Outlet Diameter Yellow Coated
Feature
- COMPLETE GAS RANGE INSTALL KIT: “Safety Shield” coated gas range or furnace installation kit
- LEAK TESTED GAS KIT: 5/8-Inch OD x 48-Inch length coated stainless steel gas connector
- GAS INSTALLATION KIT INCLUDES: two 1/2-Inch MIP (tapped 3/8-Inch FIP) brass adapters and one 3/4-Inch MIP (tapped 1/2-Inch FIP) adapter
- BEST GAS DRYER CONNECTOR KIT: Made in the USA. Everything you need to hook up your gas dryer
- Kit also includes one pipe thread sealant one leak test kit and one detailed installation guide
Description
Product Description
Dormont 0240892 Gas Appliance Connector Kit 48 In. Long 5/8 In. Outlet Diameter
From the Manufacturer
This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust Safety Shield coating provides extra corrosion protection from accidental contact with common household chemicals
4. Anderson Metals Brass Tube Fitting, Coupling, 3/8" Flare x 1/2" Female Pipe
Feature
- Coupling fitting for connecting two tubes with the same diameter
- Flared tube connection on one side and a female NPT connection on the other
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Operating temperature range of -65 to +250 degrees F
- Resists mechanical pullout for a more secure connection
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Description
This Anderson Metals coupling compression tube fitting is made of brass, has a flared tube connection and a female NPT connection, and is suitable for use with fuel and gas systems. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting can be used with copper, brass, aluminum, or steel tubing to connect two tubes of the same diameter in a straight run. It has a flared tube connection on one end and a female National Pipe Taper (NPT) connection on the other, creating a tighter seal than straight threads. This fitting is part of an assembly that resists mechanical pullout for a more secure connection, and can be assembled and reassembled without affecting the seal. This coupling compression tube fitting has an operating temperature range of -65 to +250 degrees F and is suitable for use with fuel and gas systems, plumbing, refrigeration, and vacuum applications.
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.
Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.
5. Supplying Demand 203-3132 Dryer Gas Hose With Fittings Compatible With 1/2" MIP x 1/2" FIP Hose Connections (3 Feet)
Feature
- Hose Fittings Are Compatible With 1/2″ MIP and 1/2″ FIP
- Comes in Supplying Demand packaging with help support
- This line is mainly used for gas dryers. If you are in need of a gas line for an oven then most hook ups are different sizes. This hose is not universal and will not fit all gas fittings.
6. General Electric PM15X104 Universal Gas Dryer Install Kit, 48-Inches
Description
Product Description
Safely and easily install any gas dryer with a user-friendly kit that includes all the parts you need. Includes 48″ stainless steel gas connector, 3 fittings, pipe thread sealant and leak test solution. Detailed installation guide helps make installation safe, easy and efficient.
From the Manufacturer
Safely and easily install any gas dryer with a user-friendly kit that includes all the parts you need. Includes 48″ stainless steel gas connector, 3 fittings, pipe thread sealant and leak test solution. Detailed installation guide helps make installation safe, easy and efficient.
7. Flextron FTGC-YC34-36P 36" Flexible Yellow Epoxy Coated Gas Line Connector with 1" Outer Diameter and 3/4" FIP x 3/4" MIP Fittings, Stainless Steel
Feature
- High BTU Gas Connector with 1″ Outer Diameter
- Yellow/Stainless Steel
- 36″ Long with 3/4″ FIP x 3/4″ MIP Fittings
- Gas Connector is 100% Leak Tested
- Designed and Engineered for Safe, Optimal Flow Rate
- Up to 290K BTU Flow Capacity
- FLEXSHIELD Epoxy Coating Provides Extra Corrosion Protection of Stainless Steel 304
- For Extra High Demand Appliances, Such as Tankless and Commercial Water Heaters
Description
This is a Flextron gas connector from their YC34 series of connectors, which is designed for indoor and is designed as part of a tank less water heater or -valve kit. it has an outer diameter of 1" and an inner diameter of 3/4" and is made of stainless steel coated with a yellow epoxy coating along the entire length of the connector. the coating gives it extra protection against corrosion when it comes in contact with chemicals that are typically found in households. on the ends of this 36" long connecter are a 3/4" fip and a 3/4" mip fitting, made of zinc-plated stainless steel type s45c. the connector is rated for use in the temperature range of -40 f to 150 f and it is certified by csa for use up to a pressure of 0.5 psi. please consult the product information for the flow capacity for this part, for natural gas. the part is certified by commonwealth of Massachusetts, the city of new York and by upc and csa for meeting the amse A112.18.6 and ansi Z21.24, Z21.69 and Z21.75 gas appliances and manufactured homes standards. each connector is 100% tested on leaks before it leaves the factory. the design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. it can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. its flared end fittings result in a metal to metal seal, which is tested to be leak free within a tighten torque of 1040 inch-pounds. the connector can handle external temperatures of 800 f.
8. Flextron FTGC-YC-34-24P 24 Inch Flexible Epoxy Coated High BTU Gas Line Connector W/ 1 Inch Outer Diameter & 3/4 Inch FIP x 3/4 Inch MIP Fitting, Yellow/Stainless Steel, Excellent Corrosion Resistance
Feature
- High BTU Gas Connector with 1″ Outer Diameter
- Yellow/Stainless Steel
- 24″ Long with 3/4″ FIP x 3/4″ MIP Fittings
- Gas Connector is 100% Leak Tested
- Designed and Engineered for Safe, Optimal Flow Rate
- Up to 290K BTU Flow Capacity
- FLEXSHIELD Epoxy Coating Provides Extra Corrosion Protection of Stainless Steel 304
- For Extra High Demand Appliances, Such as Tankless and Commercial Water Heaters
Description
Flextron 24 Inch Flexible Epoxy High BTU Gas Line Connector features 1 Inch Outer Diameter & 3/4 Inch Female Iron Pipe (FIP) x 3/4 Inch Male Iron Pipe (MIP) Fittings. This gas connector is from YC34 series of connectors and is made of Yellow Coated Stainless Steel. Comes with certified design, Stamp of approval, full-length corrugations, strength, and flexibility, flared end adaptors. This connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair, and masonry products as well as UV rays and salt. FLEXSHIELD Epoxy coating provides extra corrosion protection from accidental contact with common household chemicals and consistent coverage provides protection along the entire length of the connector. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. The connector can handle external temperatures of 800 Fahrenheit. Designed and engineered for safe, optimal flow rate.
Specifications:
9. BrassCraft CSSC54-72 P 1/2-Inch FIP x 1/2-Inch MIP x 72-Inch ProCoat Gas Appliance Connector, 5/8-Inch, OD 86,000 BTU
Feature
- 5/8 In. OD with 15/16-16 Thread x 72 In. stainless steel connector w/corrosion resistant coating
- 1/2 In. FIP and 1/2 In. MIP steel gas fittings
- 86,000 BTU max flow capacity. Use with natural or LP (propane) gas
- Temperature rating: -40 to 150 Degrees F. Pressure rating: 1/2 psi maximum
- 100% leak tested. Approved for indoor and outdoor use. CSA certified
Description
Product Description
Brass Craft’s 1/2 In. FIP x 1/2 In. MIP x 72 In. Recoat Gas Appliance Connector is 5/8 In. OD (1/2 In. ID) tube with a maximum operating capacity of 86,000 BTU’s. This Recoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. Recoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the Recoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
From the Manufacturer
BrassCraft’s 1/2 In. FIP x 1/2 In. MIP x 72 In. ProCoat Gas Appliance Connector is 5/8 In. OD (1/2 In. ID) tube with a maximum operating capacity of 86,000 BTU’s. This ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
Conclusion
By our suggestions above, we hope that you can found Dryer Gas Line Connection Adapter for you.Please don’t forget to share your experience by comment in this post. Thank you!