Top 9 Honeywell Lynx Touch 5210

Feature

• WiFi &amp
• ZWAVE Compatible (SOLD SEPARATELY – NOT INCLUDED)
• L5210 All-In-One Home and Business Control System
• Integrated Z-Wave® Support via L5100-ZWAVE Z-Wave Control Module for L5210 (SOLD SEPARATELY – NOT INCLUDED)    Up to three thermostats (HVAC system or battery powered) with 1°F and 0.5°C set points Four door locks – Jammed locks reported to Honeywell Total Connect® Remote Services 40 devices such as lights, switches and lamp modules 20 scenes 20 rules or event-based actions 20 schedules or time-based actions Sunrise/sunset lighting control Randomized lighting control
• Wi-Fi® via L5100-WIFI Wi-Fi IP Communication Module for L5210 (SOLD SEPARATELY – NOT INCLUDED)    IEEE 802.11 B/G/N radio Supports alarm reporting Supports two-way voice LYNX Connect app supports up to four mobile iOS and AndroidTM devices
• Honeywell 3GL Communications GSM radio (SOLD SEPARATELY – NOT INCLUDED) – protocol supports AT&amp
• T and RogersTM networks ADEMCO® Contact ID Reporting (four or ten digit account numbers) SIA Format Reporting Internet central station communication with L5100-WIFI or ILP5 module GSM cellular central station communication with internal GSM radio Selection for primary communication path when using dual paths Touch activated radio registration GSM radio signal strength display Two-way voice communication over POTS, IP/Wi-Fi or GSM Honeywell Total Connect ready Alarm Output Built-in 85 dB sounder with voice siren Steady output for burglary/panic Temporal pulse output for fire and carbon monoxide alarms Long range radio/audio alarm verification Programming Options stored in EEROM Can be uploaded, downloaded or controlled via IBM-compatible computer using Compass Downloader software and specified modem or via capable GSM, Wi-Fi or IP communications module Intuitive programming interface reduces time and mistakes Programming options selected from allowable list Contextual options, defaults and pre-fills for faster set-up Listings UL 985, UL 1023, UL 1635 CAN/ULC-S545, CAN/ULC- Subject-C1023 ANSI/SIA CP-01-2010 System Power Primary power: plug-in power supply, 110VAC to 9VDC, 2.7A output 300-04705V1 or 300-04065V1 (300-04063V1 in Canada) Four or 24-hour backup battery: rechargeable nickel-metal hydride battery pack rated at 7.2Vdc Operating temperature: 32°F – 122°F (0°C – 50°C) Dimensions (approx) 6.1″ H x 8.5″ W x 1.71″ D (15.5cm H x 21.6cm W x 4.4cm D)

Feature

Feature

• Kit Includes LYNX Touch 5210 Control Panel with Transformer and Battery Backup (3) 5815 Slim Door/Window Transmitters, (1) 5834-4 Four-button Wireless Keyfob &amp
• (1) 5800PIR-RES Wireless Motion Detector
• Integrated Z-Wave® Support via L5100-ZWAVE Z-Wave Control Module (Included) for up to three thermostats (HVAC system or battery powered) with 1°F and 0.5°C set points Four door locks – Jammed locks reported to Honeywell Total Connect® Remote Services 40 devices (lights, switches and lamp modules) 20 scenes 20 rules (event-based actions) 20 schedules (time-based actions) Sunrise/sunset lighting control Randomized lighting control
• Wi-Fi® via L5100-WIFI Wi-Fi IP Communication Module (Included) for L5210 IEEE 802.11 B/G/N radio Supports alarm reporting Supports two-way voice LYNX Connect app supports up to four mobile iOS and Android devices. Internet Central Station Communication with L5100-WIFI or ILP5 Module
• Control Panel Dimensions (approx) 6.1″ H x 8.5″ W x 1.71″ D (15.5cm H x 21.6cm W x 4.4cm D)
• **PAID MONTHLY SERVICE REQUIRED FOR HONEYWELL’S TOTAL CONNECT REMOTE SERVICES**

Feature

• Updated Model with Newest Firmware and Software
• Wifi Connectivity for Remote and Monitoring Options (Requires Monthly Fee)
• Zwave ready for Control of Lights, Door locks, Thermostats and Garage Doors
• Award Winning Technology and Design
• Includes: (3) 5816 Door/Window Transmitters, (1) 5834-4 Four-Button Wireless Keyfob (1) 5800 Pir-Res Wireless Motion Detector (1) Wifi Module (1) Zwave Module

Feature

• Kit Includes LYNX Touch 5210 Control Panel with Transformer and Battery Backup (3) 5816 WMWH Door/Window Transmitters, (1) 5834-4 Four-button Wireless Keyfob &amp
• (1) 5800PIR-RES Wireless Motion Detector (1) WIFI Module (1) Zwave Module (1) LTE-L57V Verizon LTE Communicator, Programming Manual and Quick reference guides Control Panel Dimensions (approx) 6.1″ H x 8.5″ W x 1.71″ D (15.5cm H x 21.6cm W x 4.4cm D)
• Integrated Z-Wave Support via L5100-ZWAVE Z-Wave Control Module (Included) for up to three thermostats (HVAC system or battery powered) with 1°F and 0.5°C set points Four door locks – Jammed locks reported to Honeywell Total Connect Remote Services 40 devices (lights, switches and lamp modules) 20 scenes 20 rules (event-based actions) 20 schedules (time-based actions) Sunrise/sunset lighting control Randomized lighting control
• Wi-Fi via L5100-WIFI Wi-Fi IP Communication Module (Included) for L5210 IEEE 802.11 B/G/N radio Supports alarm reporting Supports two-way voice LYNX Connect app supports up to four mobile iOS and Android devices. Internet Central Station Communication with L5100-WIFI or ILP5 Module
• Newest Honeywell LTE-L57V Verizon LTE Communicator for Dependable Uninterrupted Monitoring Service
• **PAID MONTHLY SERVICE REQUIRED FOR HONEYWELL’S TOTAL CONNECT REMOTE SERVICES**

Feature

• LARGE 7″ FULL COLOR TOUCHSCREEN DISPLAY
• VIEW UP TO 4 CAMERAS AT THE SAME TIME (Requires Compatible Cameras)
• EASY WIRELESS INSTALLATION
• AWARD WINNING DESIGN

Feature

• Updated 2015 Model with Newest Firmware and Software
• Wifi Connectivity for Remote and Monitoring Options (Requires Monthly Fee)
• Zwave ready for Control of Lights, Door locks, Thermostats and Garage Doors
• Award Winning Technology and Design
• Includes: (3) 5816 Door/Window Transmitters, (1) 5834-4 Four-Button Wireless Keyfob (1) 5800 Pir-Res Wireless Motion Detector (1) Wifi Module (1) Zwave Module (1) 4gl GSM Cellular module

Feature

• Enables WiFi Connectivity for Lynx Touch 5100, 5200, 5210, 7000 panels.
• Easy snap in installation. Must be mounted on same side as panel’s internal speaker.
• During setup, choose to configure WiFi on your Lynx Touch as DHCP (dynamically assigned IP addressing) instead of Static IP. Selecting Static IP can cause your Lynx Touch panel to enter a boot loop.

Feature

• 7″ color graphic touchscreen – Resolution 800 x 480 pixels – 16.7 million colors – Intuitive easy-to-use touchscreen interface – Easy to understand icons – Menu driven navigation – Quick, accurate programming – Two dedicated keys for easy access to the home screen and emergency functions
• On-premises video viewing – Integrated video: System supports up to four cameras, which can be displayed individually or in a quad configuration on the touchscreen. Works with compatible Honeywell Total Connect Video products only (iPCAM-PT, iPCAM-WO, iPCAM-WI2/B, ACU).
• Wi-Fi support – Alarm communication to AlarmNet and lifestyle messaging via the users Internet connection – Two-way voice over Wi-Fi – Enables the LYNX Connect iOS app (available on iTunes) and the app for Android (available on Google Play) Integrated Z-Wave provides control and integration of: – Thermostats – Water valves – Door locks – Sirens – Lighting – Scenes, schedules and rules – Local, automatic and remote control via Honeywell Total Connect
• Push/Pull content through Honeywell Total Connect – Weather available in Fahrenheit or Celsius (one day or five day forecasts) – Emergency alerts (tornadoes) requires Honeywell Total Connect with Information Services Package – Traffic – News – Dealer/Central station messages (payments due, sales opportunities, community news) – End-user requests for sales or service Advanced Protection Logic technology With APL enabled, the alarm can be reported even if the system is tampered with during the entry and communications delay times. APL can be selected when using a Honeywell GSM or IP communicator. Voice announcement of system and zone status Family message center (for user recorded messages) Works with Honeywell Total Connect – Remote control of security, garage doors and Z-Wave devices – Selected event notifications Voice chime by zone 10 selectable chime tones Automatic stay arming 48 user codes (Installer, Master, plus 46 Secondary, including Duress and Guest) Three panic functions Wall or desk mount Viewable event log stores up to 256 events Exit error feature (detects difference between an actual alarm and exit alarm caused by leaving a door open after the exit delay expires) Case tamper RF jam detection Quick Exit feature provides users with an exit delay after arming their system Night Stay and Silent Exit modes Hinged cover for easy installation Real-time clock display Garage Door Function – Up to four garage doors per system – Unique garage door icon – View and monitor garage door status – Auto-secure feature – Remote notification via Honeywell Total Connect – Garage door control* – Automatically control door via scenes, rules and schedules – Locally open/close garage door from touchscreen or compatible mobile device – Remotely open/close garage door via Honeywell Total Connect
• Local Mobility LYNX Connect iOS app and app for Android – Same functions and GUI as the L7000 Zones and Devices One hardwired zone Wireless zones 80 programmable plus 24 dedicated to keyfobs Supports wireless bidirectional keypads Internal GSM radio option Wi-Fi module option ILP5 Internet module option Programmable trigger output *Requires 5877GDPK, consisting of the 5877 Relay Receiver and Z-Wave Strobe/Sounder. Not compatible with certain garage doors and garage door openers. Garage door control must have working entrapment protection. See installation instructions for details. LYNX Connect apps are available for a nominal fee in Apple iTunes Store or Google Play Store. All trademarks are property of their respective owners..